cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
157
Views
0
Helpful
3
Replies

WLC remove trunk config

afsharki2
Beginner
Beginner

Hello, I might be asking the wrong question here because I know nothing of the WLC.

I am using a 5500 Series Wireless LAN Controller.  I have a switch connected to the wlc in which I would like to remove a vlan that is not in use anymore.  I have done this on the switch end port-channel, but how do I do this on the WLC end?  Do WLCs even use port-channels?

Thank you

1 Accepted Solution

Accepted Solutions

Rasika Nayanajith
VIP Mentor VIP Mentor
VIP Mentor

only thing you have to do on WLC end is remove dynamic interface created on those specific vlans that you do not require any longer on WLC

HTH

Rasika

*** Pls rate all useful responses ***

View solution in original post

3 Replies 3

Rasika Nayanajith
VIP Mentor VIP Mentor
VIP Mentor

only thing you have to do on WLC end is remove dynamic interface created on those specific vlans that you do not require any longer on WLC

HTH

Rasika

*** Pls rate all useful responses ***

Got it.  And I find those vlans by doing a "sh int summary" ?

YES

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: