cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
844
Views
15
Helpful
4
Replies

WLC Software Versions

c.walsh
Level 3
Level 3

Can someone explain the difference between the software versions for C9800-CL WLC's & what is required for integration with DNAC?

We have one with version 8.5.151.0, but i see versions called Gibraltar 16 & Amsterdam 17, are these for different operating modes?

Struggling to find a simple explanation on CCO.

Thanks

1 Accepted Solution

Accepted Solutions

if you have 8540/5520/3504 WLCs as AireOS based WLCs, then you should be able to send wireless data to DNA-C as long as your have 8.5.140.0 or above

https://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/dna-center/guide-c07-741858.html 

 

For 9800, any version should be good enough. However better to be in 16.12.x or above

 

HTH

Rasika

View solution in original post

4 Replies 4

Pls bookmark this page as a reference. It shows the compatibility matrix of Cisco wireless products

https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#pgfId-550562 

 

WLC are two different flavours

 

AireOS based WLC (5508/5520/8540/3504/etc)

AireOS 8.10.x is the latest and mostly could be last software release as AireOS based product to replace with IOS-XE based WLCs in future

 

IOS-XE based WLC (9800 series)

IOS-XE 16.x, 17.x  

 

If you have a controller running 8.5.151.0, it should be AireOS based, look for particular controller model ("show sysinfo" on CLI or Monitor page in GUI). Then look for the right software version on CCO applicable to that model.

 

Regarding C9800-CL (VM version of 9800), here is the page for download IOS-XE versions

https://software.cisco.com/download/home/286322605/type/282046477/release/Amsterdam-17.2.1 

 

HTH

Rasika

*** Pls rate all useful responses ***

Hi Rasika,

    Thanks for the reply, so we should be running the IOS-XE version to integrate with DNAC?

No this is not a requirement.

There are some AireOS-based WLC's supported in DNA-C.

Check compatibility here for DNA-C:

https://content.cisco.com/compatibilitymatrix.html

 

HTH
-Jesus
*** Please Rate Helpful Responses ***

if you have 8540/5520/3504 WLCs as AireOS based WLCs, then you should be able to send wireless data to DNA-C as long as your have 8.5.140.0 or above

https://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/dna-center/guide-c07-741858.html 

 

For 9800, any version should be good enough. However better to be in 16.12.x or above

 

HTH

Rasika

Review Cisco Networking for a $25 gift card