Solved: WLC3504 + AP1142N

AEPC · ‎07-31-2018

Hi everyone,

can I use an Aironet 1142N Access Point with a 3504 Wireless Controller?
The 3504 WLC is shipped with firmware 8.5, but the latest release for the AP 1142N is 8.3

Many thanks in advance!

Sandeep Choudhary · ‎07-31-2018

No, It will not work as both are not compatible.

check the matrix: https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

Info: 3504 start with 8.5 version and 1142 last support is 8.3.x

Regards

Dont forget to rate helpful posts

View solution in original post

Sandeep Choudhary · ‎07-31-2018

No, It will not work as both are not compatible.

check the matrix: https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

Info: 3504 start with 8.5 version and 1142 last support is 8.3.x

Regards

Dont forget to rate helpful posts

AEPC · ‎07-31-2018

Hi,

thanks for the quick response!

ittechk4u1 · ‎07-31-2018

Sandeep,

Could you please help me about two factor authentication!!!!

Please check it..

https://community.cisco.com/t5/wireless-and-mobility/802-1x-with-mac-authentication/m-p/3678075

Thanks