01-05-2014 11:33 PM - edited 07-04-2021 11:53 PM
We have configure Ether Channel on Core switch. And then enable feature LAG on wireless lan controller after that WLC will be reboot. and then reboot finished, I saw WLAN menu SSID Admin Status was "Disable" all of SSID.and Interface of SSID changed to interface management. I want to know why have issue. ???
Solved! Go to Solution.
01-06-2014 01:23 AM
This is the expected behaviour when you creating LAG on a controller where WLAN already being defined. Please see the following document for your reference.
https://supportforums.cisco.com/docs/DOC-20587
If this answer to your query pls mark this thread as answered.
HTH
Rasika
**** Pls rate all useful responses ****
01-06-2014 12:19 AM
Did you able to manually enable the SSID & change the dynamic interfaces of your WLAN ?
Is it working or you have issues with it ?
Rasika
01-06-2014 01:09 AM
Yes , I can manual enable the SSID. and It's working everything. But my customer want to know cause admin status of SSID auto disable after enable LAG.
01-06-2014 01:23 AM
This is the expected behaviour when you creating LAG on a controller where WLAN already being defined. Please see the following document for your reference.
https://supportforums.cisco.com/docs/DOC-20587
If this answer to your query pls mark this thread as answered.
HTH
Rasika
**** Pls rate all useful responses ****
01-06-2014 01:32 AM
Thanks so much Rasika
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide