10-16-2017 09:53 AM - edited 07-05-2021 07:44 AM
Software version:Cisco IOS Software, C1250 Software (C1250-K9W7-M), Version 12.4(10b)JA1, RELEASE SOFTWARE (fc2)
For some reason it will not allow me to set a passphrase to anything less than 15 characters. WPA2 should allow for 8 characters or more. Anyone else have this problem or know the solution?
Solved! Go to Solution.
10-18-2017 11:12 PM
Did you try like this:(Dont use 7)
dot11 ssid XXXX
authentication open
authentication key-management wpa version 2
wpa-psk ascii cisco123
wpa-psk ascii 7 XXXXXXXXXXXXXXXXXXXXXXXX
Regards
Dont forget to arte helpful posts
10-17-2017 12:07 AM
Hi,
shortest password allowed with WPA2 is 8 characters long and it must work. You must be doing something in config.
Could you paste the AP config here.
Regards
Dont forget to rate helpful posts
10-18-2017 08:13 AM
10-18-2017 11:12 PM
Did you try like this:(Dont use 7)
dot11 ssid XXXX
authentication open
authentication key-management wpa version 2
wpa-psk ascii cisco123
wpa-psk ascii 7 XXXXXXXXXXXXXXXXXXXXXXXX
Regards
Dont forget to arte helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide