A9K-MOD200TR and A9K-VSM-500 in UNPOWERED state

[manoj.karmacharya]

P/0/RSP0/CPU0:ios-xr#admin show platform 

Thu Apr 19 04:36:11.243 UTC

Node            Type                      State            Config State

-----------------------------------------------------------------------------

0/RSP0/CPU0     A9K-RSP440-TR(Active)     IOS XR RUN       PWR,NSHUT,MON

0/FT0/SP        ASR-9010-FAN-V2           READY            

0/FT1/SP        ASR-9010-FAN-V2           READY            

0/0/CPU0        A9K-MOD200-TR             UNPOWERED        PWR,NSHUT,MON

0/3/CPU0        A9K-VSM-500               UNPOWERED        PWR,NSHUT,MON

0/PS0/M0/SP     PWR-3KW-AC-V2             FAILED           PWR,NSHUT,MON

0/PS1/M0/SP     PWR-3KW-AC-V2             FAILED           PWR,NSHUT,MON

[srekrish]

Both power modules are in FAILED state.Please check the power

0/PS0/M0/SP     PWR-3KW-AC-V2             FAILED           PWR,NSHUT,MON

0/PS1/M0/SP     PWR-3KW-AC-V2             FAILED           PWR,NSHUT,MON

[manoj.karmacharya]

A bit confused, i've installed only one PSU on each Power Card. But IOS-XR displaying both PSU in failed state.

RP/0/RSP0/CPU0:ios-xr#admin show inventory power-supply
Thu Apr 19 04:51:16.065 UTC
NAME: "power-module 0/PS0/M0/SP", DESCR: "3kW AC V2 Power Module"
PID: PWR-3KW-AC-V2, VID: V03, SN:

NAME: "power-module 0/PS1/M0/SP", DESCR: "3kW AC V2 Power Module"
PID: PWR-3KW-AC-V2, VID: V03, SN:

[manoj.karmacharya]

RP/0/RSP0/CPU0:ios-xr#admin show inventory power-supply
Thu Apr 19 04:51:16.065 UTC
NAME: "power-module 0/PS0/M0/SP", DESCR: "3kW AC V2 Power Module"
PID: PWR-3KW-AC-V2, VID: V03, SN:

NAME: "power-module 0/PS1/M0/SP", DESCR: "3kW AC V2 Power Module"
PID: PWR-3KW-AC-V2, VID: V03, SN:

[tkarnani]

paste admin show environment power

it will tell you power consumption etc