cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1056
Views
0
Helpful
2
Replies

asr 9006 bgp network advertisement problem null0 routes

Umit AYDINLI
Level 1
Level 1

Hi,

I want to ask a question cisco experts. I have couple of cisco asr 9006. I have to reload with cef problem after then reload I saw didn't advertise ip blocks my router.

I checked the configuration then I saw 2a02:ac80::/32 Null0 240 the configs are correct.

I could remove the config no 2a02:ac80::/32 Null0 240 after that wrote config again 2a02:ac80::/32 2a02:ac80::1 after then start to advertisement.

What can I wrong?

I know IOS bgp advertisement. Have to ip blocks per null0 routes. What different IOS and XR?

2 Replies 2

Rivalino Tamaela
Cisco Employee
Cisco Employee

Hi,

Looks like you redistribute static route into BGP. Do you have other static routes other than the route you mentioned above? If yes, did they have same problem too? In term of BGP advertisement, there is no difference between IOS and XR.

thanks,

rivalino

Hi, yes I have.

I'm using Cisco IOS XR Software, Version 4.1.2[Default]

My bgp conf are below.

!

prefix-set IPV6_Dist

2a02:ac80::/32

end-set

!

route-policy Dist_IPV6

  if destination in IPV6_Dist then

    pass

  else

    drop

  endif

  end-policy

!

router static

address-family ipv6 unicast

  2a02:ac80::/32 Null0 240

!

neighbor

  remote-as xxxx

  password encrypted

  description

  update-source TenGigE0/1/0/0.103

  address-family ipv6 unicast

   route-policy Accept-All in

   maximum-prefix 512000 95

   route-policy IPV6 out

   soft-reconfiguration inbound always

  !

!


RP/0/RSP1/CPU0:#sh bgp ipv6 unicast summary

Neighbor        Spk    AS MsgRcvd MsgSent   TblVer  InQ OutQ  Up/Down  St/PfxRcd

                  0  79181    9108   197216    0    0    1d17h      16447

RP/0/RSP1/CPU0:#sh bgp ipv6 unicast advertised summary

Wed Mar  5 09:13:13.516 GMT

RP/0/RSP1/CPU0:#sh bgp ipv6 unicast advertised

Wed Mar  5 09:13:15.754 GMT

RP/0/RSP1/CPU0:#