cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1110
Views
0
Helpful
2
Replies

ASR 9K IOX XR Turboboot

netops044
Level 1
Level 1

Hi Experts,

Im trying to downgrade XR image in ASR9K from 4.3.1 to 4.2.3. The VM file size is about 330Mb. TFTP operation is getting terminated  after some point of time. Im using 3Cdeamon server and has configured  max timeout and retries already. Is there anything Im missing here.

rommon B40 > set

PS1=rommon ! >

ReloadReason=0

ACTIVE_FCD=1

IOX_ADMIN_CONFIG_FILE=

IML=1

BSI=0

CLUSTER_NO_BOOT=

BOOT_DEV_SEQ_CONF=

IP_ADDRESS=202.144.113.7

IP_SUBNET_MASK=255.255.255.192

DEFAULT_GATEWAY=202.144.113.1

TURBOBOOT=on,disk0,format

TFTP_RETRY_COUNT=8

TFTP_TIMEOUT=10000

TFTP_SERVER=202.144.113.60

TFTP_BLKSIZE=1450

TFTP_VERBOSE=1

TFTP_MGMT_INTF=1

TFTP_FILE=/asr9k-mini-p.vm-4.2.3

TFTP_CHECKSUM=1

?=0

I have tried changing MGMT_INTF, CHECKSUM=0, BLKSIZE=1400 etc.

TFTP gets terminated after copying about 150Mb. Total VM size is 330Mb

Appreciate your quick response.

Regards,

Darshak

2 Replies 2

netops044
Level 1
Level 1

Hi all,

I was able to complete the tftp operation using Solar Winds. I have completed the downgrade successfully.

Thanks,

Darshak

If you have RSP440, next time use USB directly connected in the RSP, it will be faster and easier than TFTP.

Cassio

Sent from Cisco Technical Support iPhone App