cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1046
Views
5
Helpful
2
Replies

ASR 9K SMU question

xzjleo2005
Level 1
Level 1

Hi guys, we want to install the SMU asr9k-p-4.2.0.CSCty91147.tar on our ASR 9k. After I install add it on ASR, when I typed install activate ?, I got  two items. But when I show intall inactive, only one iteam show up. My question is which one should I install activate, asr9K or iosxr? Thanks.

------------------------------------------------------------------------------------------------------------------

install activate ?

   disk0:asr9k-p-4.2.0.CSCty91147-1.0.0      Package to activate

  disk0:iosxr-infra-4.2.0.CSCty91147-1.0.0  Package to activate

show install inactive

   disk0:asr9k-p-4.2.0.CSCty91147-1.0.0

------------------------------------------------------------------------------------------------------------------

Regards, Leo

1 Accepted Solution

Accepted Solutions

Alexei Kiritchenko
Cisco Employee
Cisco Employee

Hello Leo,

asr9k-p-4.2.0.CSCty91147-1.0.0  is the name of the deployed SMU

iosxr-infra-4.2.0.CSCty91147-1.0.0  is the package inside the SMU.

One SMU may contain several packages, for example asr9k-p-4.2.0.CSCty98459 has 4 packages inside

    asr9k-fwding-4.2.0.CSCty98459

    asr9k-os-supp-4.2.0.CSCty98459

    asr9k-os-mbi-px-4.2.0.CSCty98459

    asr9k-base-4.2.0.CSCty98459

In your case, as there is only one package inside, you may use any name, but in general, as there may be several files to activate, use the main SMU name.

You can find the information on the SMU name and contained packages in the supplied txt file.

Regards,

/A

View solution in original post

2 Replies 2

Alexei Kiritchenko
Cisco Employee
Cisco Employee

Hello Leo,

asr9k-p-4.2.0.CSCty91147-1.0.0  is the name of the deployed SMU

iosxr-infra-4.2.0.CSCty91147-1.0.0  is the package inside the SMU.

One SMU may contain several packages, for example asr9k-p-4.2.0.CSCty98459 has 4 packages inside

    asr9k-fwding-4.2.0.CSCty98459

    asr9k-os-supp-4.2.0.CSCty98459

    asr9k-os-mbi-px-4.2.0.CSCty98459

    asr9k-base-4.2.0.CSCty98459

In your case, as there is only one package inside, you may use any name, but in general, as there may be several files to activate, use the main SMU name.

You can find the information on the SMU name and contained packages in the supplied txt file.

Regards,

/A

Hi Alex, thanks for your reply.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: