cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1185
Views
0
Helpful
3
Replies

ASR9001 BNG over Xconnect (Two sites) with Geo-Redundancy

startx001
Level 1
Level 1

HI ,

 

Have anyone implemented this kind of deployment ?

I asking because i saw that use cases can be MSTAG or MSLAG and i would like to use MSTAG because i need solution load sharing with standby-hot.

Can anyone tell me is it working when using xconnect as pppoe transport, and how is this done ? 

Im interested most in how pppoe session will switch from active to standby chassis in this concept or i should use BNG cluster instead ?

Im planning  to use XR version 6.4.4.screen_shot_2016-04-18_at_9.56.17_am.png

 

 

 

3 Replies 3

antonio.kucar
Level 1
Level 1

Hello startx001,

 

Did you find a working solution when using xconnect as pppoe transport?
Did you transport multiple VLANs over xconnect from one side (access/modems) to other side (BNGs)?

I am planning a similar setup so I wonder how it works at yours ASR9ks.

 

BR,

Antonio

Hello startx001,

 

You can use pseudowire redundancy with active/backup pseudowire : 

 

https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-3/lxvpn/configuration/guide/lesc43xbook/lesc43p2ps.html#pgfId-1262000

 

If you access network is pure L3/MPLS you can use Pseudowire Headend in order to terminate your services on the BNG :

 

https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-3/lxvpn/configuration/guide/lesc43xbook/lesc43p2mps.html#pgfId-1341764

 

Michalis