cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
443
Views
0
Helpful
2
Replies
Highlighted
Beginner

ASR9010 router alarm

Dear all One of our ASR9010 router has alarm as below. RP/0/RSP0/CPU0:Oct 9 09:57:42.686 : shelfmgr[416]: %PLATFORM-SHELFMGR-0-MAX_RESET_BRINGDOWN : Can not boot node 0/RSP1/CPU0 A9K-RSP440-TR due to multiple resets, putting it IN_RESET state. The probable cause is an unexpected event on the node or a failure in communication with the node. Please refer to the Cisco ASR 9000 System Error Message Reference Guide for further information if needed. RP/0/RSP0/CPU0:Oct 9 09:57:47.689 : canb-server[155]: %PLATFORM-CANB_SERVER-7-CBC_PRE_RESET_NOTIFICATION : Node 0/RSP1/CPU0 , Power Cycle (0x05000000) We had reset this RSP line card yesterday, and alarm disappeared. What is the root reason?
2 REPLIES 2
Highlighted
Beginner

The RSP1 was apparently crashing too often, so the shelf manager decided to shut it down. The syslog should contain more information about the reason for repeated crashes.

/Aleksandar

Highlighted
Beginner

Hi, this is related to a Hardware Issues and need replace it.

 

Regards.

Content for Community-Ad