Hello all
We use ASR9k for PPPoE termination in our network. We have DSLAMs from various vendors but some (especially older models) have very limited buffer size per port. We wish to perform shaping / QoS on the ASR9K on PPPoE basis. So for e.g. subscribers that have a sync rate of 10Mbps we would apply something like:
policy-map shape-10M
class class-default
shape average 1000 kbps
queue-limit 100 packets
!
If the max buffer size in our DSLAMs is e.g. 100000 bytes I would like to configure the shaping accordingly (setting the burst size to 100000bytes) but no such parameter is present in the "shape average" command.
Is there any way to find (and if needed change) the burst-size for a shaping policy in ASR9k?
Thanks
V.