XR OS and Platforms

i found documents say no two years ago?does now ASR 9k support l2tp LNS?I search document for version 5.3, no result?because ASR 1k support LNS, so customer think asr 9k support LNS too.but it is totally differenct produc line.

Hi, I am testing XRv in my lab environment and I have this topology: CSR1<-gi2.112->---eBGP---<-gi0.112->XR2<------iBGP----->XR1 There is Lo0 adresses: CSR1 - 10.0.0.11 XR2 - 10.0.0.2 XR1 - 10.0.0.1 I have established eBGP session between CSR1 and ...

Hi everyoneI have question about ASR 9901 capacity license. As I read in documents,  we can buy ASR-9901 with different capacity and also we have capability to upgrade capacity with PAYG license. 120G to 256G; 256G to 456G. Lets say I bought ASR-9901...

Hi guys,   I have 2 racks of ASR 9006, wanting to move one of RSP from RackA to RackB    RackA : 2 RSP (want to move the standby one to be standby RSP for RackB) . // OS 5.3.3 RackB : only 1 RSP // OS 6.5.3    1). If I move RSP to RackB, do I need to...

Hi allI have some questions regarding the statistics we can collect regarding NAT when configured on ASR9KThe command show cgn nat44 nat1 statistics will show the number of translations and the ports in use , is there other command that will show how...

hello,i'm trying to restart a subscriber session using COA , i tried to use this command in the radius client :echo "User-Name='test', Cisco:Avpair=“subscriber:command=reauthenticate” Cisco:Avpair=“subscriber:reauthenticate-type=last”" | radclient -c...

I am working on downgrading our new ASR 9906's with RSP-880's to our standard version, 6.4.2 SP3 Classic. I'm copying the 6.4.2 mini from a USB drive (disk2:), and then proceeding with the following commands: copy disk2:/asr9k-mini-px.vm-6.4.2 harddi...

Hi All, Our team is working on deploying some NCS5501's. We are brand new to IOS-XR and mostly it's been going pretty well, minus some smart call home bugs that are supposed to be fixed in 7.1.0... However, one of our routers is running into this str...

Hello, I have an ASR9K running on version 6.5.3I tried to connect a link between the ODF transmission and port 1G on ASR 1K and the port remain down. The port configuration: interface GigabitEthernet0/1/0/17ipv6 enable!interface GigabitEthernet0/1/0/...

Need help in resolving the issue which I am facing frequently. While migrating IGP OSPF--> ISIS, the  BDI toward access ring in not coming up, Apart from this the node (Asr-9k) device gets unmanaged. need the resolution to this issue. Configuration p...

Hello Staff, I need to manager ASR900 with NPS,someone can help me with some material or additional information?

Hi everyone,I try to prevent a cross link between two ASR9k from becoming the designated port.spanning-tree pvrst CORE-CROSSLINK vlan 500  priority 28672 ! interface Bundle-Ether1  vlan 500 cost 2 ! interface TenGigE0/1/0/2  vlan 500 cost 4  guard ro...

I would like to know if there is a command to view all VPNV4 VRF neighbors in a summary format, rather than having to search each via a single VRF command. A single VRF example:show bgp vrf ABC summaryThis would give the neighbor summary for just thi...

Hello;I have cisco NCS540, the evaluation period expired and I need to active the license.See below the current license status```P/0/RP0/CPU0:lab-1-ncs540#sh license summaryTue Dec 3 14:58:03.919 CETSmart Licensing is ENABLEDRegistration:Status: REGI...