10-31-2022 07:26 AM
Hello
Both CE received routers each other, but routes not reachable, they can access the next hop(PE) but in core routers somewhere the traffic getting blocked. Attached configs and topology
Solved! Go to Solution.
10-31-2022 07:55 AM
Hi @feroz syed ,
You need to enable LDP between the two PEs.
Regards,
10-31-2022 07:50 AM
I know little about XR but I dont see MPLS config between both PE??
10-31-2022 08:37 AM
Thanks both of you for your help...Very hard to work with Xr routers, sometimes the cmd not accept sometime it work.. it like usb connect to pc, you have give try twice third time it get work.
10-31-2022 08:49 AM
Yes, I was use Laptop with i5 and ram 8 gb and it nightmare,
now I order new PC with ryzen 9 5900x and 32 gb to run more advance lab include CSR1000v.
10-31-2022 07:55 AM
Hi @feroz syed ,
You need to enable LDP between the two PEs.
Regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide