HI
I have to ASR9010 to be a NvEdge Systems.and i need get a BNG in my ASR9010
this is my configuation
now subscribers can creating the session by BNG,and register in the CoA(PortServer) and Radius Server
but my account have a problem, in my show subscriber session all detail,i can see the username and COA pushed username
RP/0/RSP0/CPU0:ios#show subscriber session all detail
Mon Apr 20 23:24:02.171 UTC
Interface: Bundle-Ether100.2.ip12
Circuit ID: Unknown
Remote ID: Unknown
Type: IP: Packet-trigger
IPv4 State: Up, Mon Apr 20 23:23:42 2015
IPv4 Address: 49.52.9.119, VRF: default
Mac Address: Unknown
Account-Session Id: 0000028d
Nas-Port: Unknown
User name: test1 <------------------------------there
Formatted User name: unknown
Client User name: unknown
Outer VLAN ID: 2
Subscriber Label: 0x00000052
Created: Mon Apr 20 23:23:42 2015
State: Activated
Authentication: authenticated
Authorization: unauthorized
Access-interface: Bundle-Ether100.2
Policy Executed:
policy-map type control subscriber IP_PM
event Session-Start match-first [at Mon Apr 20 23:23:42 2015]
class type control subscriber IPoE do-until-failure [Succeeded]
5 activate dynamic-template IP_SUB [Succeeded]
10 activate dynamic-template HTTPR [Succeeded]
20 set-timer UNAUTH_TMR 1 [Succeeded]
event Account-Logon match-first [at Mon Apr 20 23:23:53 2015]
class type control subscriber IPoE do-until-failure [Succeeded]
10 authenticate aaa list ECNU [Succeeded]
20 deactivate dynamic-template HTTPR [Succeeded]
Session Accounting:
Acct-Session-Id: 0000028d
Method-list: ECNU
Accounting started: Mon Apr 20 23:23:42 2015
Interim accounting: On, interval 10 mins
Last successful update: Never
Next update in: 00:09:41 (dhms)
Last COA request: Mon Apr 20 23:23:53 2015
COA Request Attribute List: 0x1000f0c4
1: addr len= 4 value= 49.52.9.119
2: password len= 6 value= <opaque value>
3: username len= 5 value= test1 <------------------------------there
4: command len= 14 value= account-logon
Last COA response: Result ACK
COA Response Attribute List: 0x1000f2d4
but my radius Server can't see the username of the Session
radius Server only can see the username(mac) in the IPoE L2 session, and see null in the IPoE L3 session
what wrong of me?
thanks
