Egress ACL: Object groups not supported on this LC

[Lyphiard]

I currently have an ASR 9010 running IOS-XR 5.1.3 with a A9K-RSP440-SE, A9K-8T-L, and A9K-40GE-L. I'm attempting to create an egress ACL for IPv4 and IPv6 traffic exiting my network.

object-group network ipv4 ipv4-permit-smtp
  1.1.1.1/32
!

ipv4 access-list ipv4-transit-egress
  100 permit tcp net-group ipv4-permit-smtp any eq smtp counter IPV4_SMTP_EGRESS_PERMIT
  200 deny tcp any any eq smtp counter IPV4_SMTP_EGRESS_DENY
  2147483643 permit ipv4 any any counter IPV4_ANY_EGRESS_PERMIT
!

interface GigabitEthernet0/2/0/0
  ipv4 access-group ipv4-transit-egress egress hardware-count interface-statistics
!

However, when committing the changes, I receive the following error:

interface GigabitEthernet0/2/0/0
  ipv4 access-group ipv4-transit-egress egress hardware-count interface-statistics
!!% 'pfilter-ea' detected the 'warning' condition 'Object groups not supported on this LC'
!

Would this be due to me having the low queue (-L) version of the line cards, or do Trident-based cards simply not support this feature?

Would something such as an A9K-24X10GE-TR (Typhoon) support this instead?

[tkarnani · Accepted solution]

you are correct, it is not supported on Trident based LC or Sip-700 cards, only typhoon and higher

From Release 4.3.1, object group is only supported on ASR 9000 Enhanced Ethernet Line Card. 

link to doc

Thanks