08-25-2023 12:11 AM
Hello
I have AGG-PE have @ip loopback 10.1.221.81 and i want to configure Legacy VPLS to EVPN Seamless
I have
virtual vfi <evi-id>
ethernet-segment
identifier type 0 <identifier_value>
My question how i can configure this : ===> identifier type 0 <identifier_value>
I wait a reply from expert service provider
Thanks in advance
08-26-2023 06:06 AM
Hello
I wait some one answer me
Thanks
08-28-2023 09:18 AM
Hi Dhikra,
Are you looking for help to build the ID itself? If so then this doc can help:
If not, then I will need some help from you to understand the request to serve you better.
Niko
08-29-2023 11:31 PM
Hello
we have this scrpit : Inter-area EVPN & VPLS Interconnection configuration on AG-1 and AG-2 – IOS XR ( ASR9K )
also we have in Legacy VPLS to EVPN Seamless
router bgp 65000
router-id <loopback0_ip>
ibgp policy out enforce-modifications
address-family l2vpn evpn
neighbor-group <name_neighbor_group>
remote-as 65000
description –TT Core RR--
update-source Loopback0
address-family l2vpn evpn
route-reflector-client
neighbor <IP_address>
descritpion <description>
use neighbor-group <name_neighbor_group>
evpn
evi <evi-id>
bgp
advertise-mac
virtual vfi <evi-id>
ethernet-segment
identifier type 0 <identifier_value>
i read the document but i don't unterstant how i can configure identifier type 0 <identifier_value> !!
I will give exmple :
router bgp 65000
router-id 10.1.221.81
ibgp policy out enforce-modifications
address-family l2vpn evpn
neighbor-group TO-router-RR
remote-as 65000
description –TT Core RR--
update-source Loopback0
address-family l2vpn evpn
route-reflector-client
neighbor 10.1.100.14
descritpion RR-1
use neighbor-group TO-router-RR
neighbor 10.1.100.11
descritpion RR-1
use neighbor-group TO-router-RR
evpn
evi 5
bgp
advertise-mac
virtual vfi 5
ethernet-segment
identifier type 0 <identifier_value>
l2vpn
bridge group VPLS-TO-EVPN
bridge-domain bd-1
access-vfi 5
neighbor ipv4 10.121.3.7 pw-id 121370005
neighbor ipv4 10.121.3.2 pw-id 121320005
evi 5
on what basis ?? i don't unterstant how i can configure this paramter in ASR9K or NCS55A2 !!
i wait your help
Thanks
if possible give me an example already configured in real and in production mode !!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide