02-10-2020 09:30 PM
This 9001 router is stuck in boot loop and I have yet to figure this out. Ive tried 6.1.4 vm file and 4.3.4 vm file load from rommon boot using tftp but neither works. I get the below errors when I get vm loaded from rommon. The install completes but I have no ability to configure interface to do anything and then it reboots at the end. Anyone have any ideas how to save this?
Process 8380612 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:07:47.332 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:07:47.333 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 108) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:07:57.549 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:07:57.549 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
Process 8384708 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:07:57.549 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8384708 (pkg/bin/dao_tmp)
RP/0/RSP0/CPU0:Feb 11 02:07:57.588 : dumper[60]: %OS-DUMPER-3-PATH_FAILED : Core dump for pkg/bin/dao_tmp failed due to lack of working dump path choice
RP/0/RSP0/CPU0:Feb 11 02:07:57.632 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:07:57.632 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 109) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:08:07.852 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:08:07.852 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
RP/0/RSP0/CPU0:Feb 11 02:08:07.852 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8388804 (pkg/bin/dao_tmp)
Process 8388804 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:08:08.838 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:08:08.839 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 110) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:08:19.055 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:08:19.055 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
RP/0/RSP0/CPU0:Feb 11 02:08:19.055 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8392900 (pkg/bin/dao_tmp)
Process 8392900 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:08:19.995 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:08:19.996 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 111) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:08:30.211 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:08:30.211 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
RP/0/RSP0/CPU0:Feb 11 02:08:30.211 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8396996 (pkg/bin/dao_tmp)
Process 8396996 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:08:31.179 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:08:31.180 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 112) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:08:37.439 : online_diag_rsp[450]: %DIAG-DIAG-3-GOLDXR_FAIL : ClkCtrlScratchRegister ERROR: 0x16: Invalid argument
RP/0/RSP0/CPU0:Feb 11 02:08:41.402 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:08:41.402 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
Process 8401092 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:08:41.402 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8401092 (pkg/bin/dao_tmp)
RP/0/RSP0/CPU0:Feb 11 02:08:41.440 : dumper[60]: %OS-DUMPER-3-PATH_FAILED : Core dump for pkg/bin/dao_tmp failed due to lack of working dump path choice
RP/0/RSP0/CPU0:Feb 11 02:08:41.482 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:08:41.483 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 113) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:08:51.698 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:08:51.698 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
RP/0/RSP0/CPU0:Feb 11 02:08:51.698 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8405188 (pkg/bin/dao_tmp)
Process 8405188 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414 bdslot=1
RP/0/RSP0/CPU0:Feb 11 02:08:52.635 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:08:52.635 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 114) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:09:02.849 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:09:02.849 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
RP/0/RSP0/CPU0:Feb 11 02:09:02.849 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8409284 (pkg/bin/dao_tmp)
Process 8409284 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:09:03.794 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:09:03.795 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 115) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:09:14.012 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:09:14.012 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
RP/0/RSP0/CPU0:Feb 11 02:09:14.012 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8413380 (pkg/bin/dao_tmp)
Process 8413380 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:09:14.050 : dumper[60]: %OS-DUMPER-3-PATH_FAILED : Core dump for pkg/bin/dao_tmp failed due to lack of working dump path choice
RP/0/RSP0/CPU0:Feb 11 02:09:14.092 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:09:14.092 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 116) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:09:24.315 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:09:24.315 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
RP/0/RSP0/CPU0:Feb 11 02:09:24.315 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8417476 (pkg/bin/dao_tmp)
Process 8417476 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:09:25.287 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:09:25.288 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 117) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:09:35.521 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:09:35.521 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
RP/0/RSP0/CPU0:Feb 11 02:09:35.521 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8421572 (pkg/bin/dao_tmp)
Process 8421572 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:09:35.560 : dumper[60]: %OS-DUMPER-3-PATH_FAILED : Core dump for pkg/bin/dao_tmp failed due to lack of working dump path choice
RP/0/RSP0/CPU0:Feb 11 02:09:35.601 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:09:35.602 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 118) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:09:37.440 : online_diag_rsp[450]: %DIAG-DIAG-3-GOLDXR_FAIL : ClkCtrlScratchRegister ERROR: 0x16: Invalid argument
RP/0/RSP0/CPU0:Feb 11 02:09:45.817 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:09:45.817 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
RP/0/RSP0/CPU0:Feb 11 02:09:45.817 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8425668 (pkg/bin/dao_tmp)
Process 8425668 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:09:46.758 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:09:46.759 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 119) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:09:56.979 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:09:56.979 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
RP/0/RSP0/CPU0:Feb 11 02:09:56.979 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8429764 (pkg/bin/dao_tmp)
Process 8429764 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:09:57.963 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:09:57.964 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 120) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:10:08.185 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:10:08.185 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
RP/0/RSP0/CPU0:Feb 11 02:10:08.185 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8433860 (pkg/bin/dao_tmp)
Process 8433860 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:10:09.146 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:10:09.146 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 121) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:10:19.364 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:10:19.364 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
RP/0/RSP0/CPU0:Feb 11 02:10:19.364 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8437956 (pkg/bin/dao_tmp)
Process 8437956 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:10:20.324 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:10:20.325 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 122) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:10:30.548 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:10:30.548 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
RP/0/RSP0/CPU0:Feb 11 02:10:30.548 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8442052 (pkg/bin/dao_tmp)
Process 8442052 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:10:30.590 : dumper[60]: %OS-DUMPER-3-PATH_FAILED : Core dump for pkg/bin/dao_tmp failed due to lack of working dump path choice
RP/0/RSP0/CPU0:Feb 11 02:10:30.633 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:10:30.634 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 123) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:10:37.441 : online_diag_rsp[450]: %DIAG-DIAG-3-GOLDXR_FAIL : ClkCtrlScratchRegister ERROR: 0x16: Invalid argument
RP/0/RSP0/CPU0:Feb 11 02:10:40.854 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:10:40.854 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
RP/0/RSP0/CPU0:Feb 11 02:10:40.855 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8446148 (pkg/bin/dao_tmp)
Process 8446148 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:10:41.833 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:10:41.834 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 124) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:10:52.058 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:10:52.058 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
RP/0/RSP0/CPU0:Feb 11 02:10:52.059 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8450244 (pkg/bin/dao_tmp)
Process 8450244 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:10:53.008 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:10:53.009 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 125) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:11:03.220 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:11:03.220 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
RP/0/RSP0/CPU0:Feb 11 02:11:03.221 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8454340 (pkg/bin/dao_tmp)
Process 8454340 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:11:04.194 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:11:04.195 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 126) will be respawned in 10 seconds
RP/0/RSP0/CPU0:Feb 11 02:11:14.410 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:11:14.410 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
RP/0/RSP0/CPU0:Feb 11 02:11:14.410 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8458436 (pkg/bin/dao_tmp)
Process 8458436 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:11:15.373 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:11:15.374 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 127) will be respawned in 10 seconds
%C-MC-CHECKER-3-DEBUG : Excess 128 MC errors
RP/0/RSP0/CPU0:Feb 11 02:11:25.584 : dumper[60]: %OS-DUMPER-4-SIGBUS_INFO : Thread 1 received SIGBUS - Bus error
RP/0/RSP0/CPU0:Feb 11 02:11:25.585 : dumper[60]: %OS-DUMPER-4-BUS_ADRERR : Signal code 2 - BUSADRERR. Trying to access non-existent physical address f50bf414 at PC f50bf414
RP/0/RSP0/CPU0:Feb 11 02:11:25.585 : dumper[60]: %OS-DUMPER-4-CRASH_INFO : Crashed pid = 8462532 (pkg/bin/dao_tmp)
Process 8462532 (dao_tmp) terminated SIGBUS code=2 fltno=41 ip=f50bf414
RP/0/RSP0/CPU0:Feb 11 02:11:26.514 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(1) (jid 55) exited, will be respawned with a delay (slow-restart)
RP/0/RSP0/CPU0:Feb 11 02:11:26.515 : sysmgr[97]: %OS-SYSMGR-3-ERROR : dao_tmp(55) (fail count 128) will be respawned in 10 seconds
%C-MC-CHECKER-3-DEBUG : Shutting down node due to excess 129 MC errors
RP/0/RSP0/CPU0:Feb 11 02:11:36.727 : dumper[60]:reboot internal : cause code 134217749 cause Excess Machine Check Condition
reboot_internal timeout 30 is %OS-DUMPER-4-SIgracGBUS_INFO : Threeful no
ELBC LTESR : 0x80000000
[0x1218f9e55e] Record Reboot History, reboot cause = 0xc000015, descr = Cause: Excess Machine Check Condition Process: p40x0mc Traceback: f4884654 f488[0x1219d84839] Initializing harddisk file system
[0x1223ee8673] Uninitialized harddisk partition table entry 0, expecting 80
[0x12243017f2] Initializing bootflash file system
[0x12245cbd62] Record CCSR information
!
Writing CCSR done
Dump Directory
KD: RSP0.200211-021137.e500, start = 1c01000, size = c710, crc = 0
rebooting
cgNsRԤѕɅUʪWɥBʢj͍ͱJ卹jRԤW$MKP4 12:08 by nidutta
Starting Initialization of FMAN0
***PPC PROCESSOR REV=3 load FMAN ucode***
Loading ucode for FMAN0, size: 6992, ver: 101.08.00
Starting Initialization of FMAN1
***PPC PROCESSOR REV=3 load FMAN ucode***
Loading ucode for FMAN1, size: 6992, ver: 101.08.00
Serdes Protocol: 0x10
CPU Reset Reason = 0x0001
Initializing GIGE SW...
PPC P40X0 (partnum 0x8023), Revision 03.00, (Core Version 03.01)
Sys Clock: 100 Mhz
Core Clock: 1500 Mhz
Plat Clock: 800 Mhz
LBC Clock: 25 Mhz
MEM Clock: 1300 Mhz
System Bootstrap, Version 2.04(20140424:063844) [ASR9K ROMMON],
Copyright (c) 1994-2014 by Cisco Systems, Inc.
Compiled Thu 24-Apr-14 12:08 by nidutta
Board Type: 0x100401
CPU Board => Rev: 0x3
=========
FPGA ver: 01.0f
CBC: 16.72
DTI programmed with latest image
TIMEX programmed with latest image
MLAN init done: ready to connect to the network
BCM5482PhyInit () : Port 0 --> SFP Not present
BCM5482PhyInit () : Port 1 --> SFP Not present
set_chassis_type: chassis_type=0xef0400 found=TRUE
ASR9001E (P40X0 PPC) RSP platform with 8192 Mb of main memory
program load complete, entry point: 0x100000, size: 0x2ac20
Set baud rate to: 9600
Fail to open file name mbi_image
CARD_SLOT_NUMBER: 0
CPU_INSTANCE: 1
MBI Validation starts ...
Disabling both Mgt LAN ports
Enabling Cluster Port 0 and disabling Port 1
BCM5482 cluster port-1 reset done !!
Port 0. SFP Not Ready (0:0). Init failed
using TSEC.
dtsec_init_hw: configuring DTSEC (port 8) for: 1GB, Full Duplex
Interface link changed state to UP.
Interface link state up.
MBI validation sending request.
HIT CTRL-C to abort
.........
No MBI confirmation received from dSC
CARD_SLOT_NUMBER: 0
CPU_INSTANCE: 1
MBI Validation starts ...
Enabling Cluster Port 1 and disabling Port 0
BCM5482 cluster port-0 reset done !!
Port 1. SFP Not Ready (0:0). Init failed
using TSEC.
dtsec_init_hw: configuring DTSEC (port 8) for: 1GB, Full Duplex
Interface link changed state to UP.
Interface link state up.
MBI validation sending request.
HIT CTRL-C to abort
.........
No MBI confirmation received from dSC
AUTOBOOT: Boot string = <not set>
AUTOBOOT: autobootstate=0, autobootcount=0, cmd=boot
Boot Status 16
program load complete, entry point: 0x100000, size: 0x2ac20
Set baud rate to: 9600
Fail to open file name mbi_image
CARD_SLOT_NUMBER: 0
CPU_INSTANCE: 1
MBI Validation starts ...
Disabling both Mgt LAN ports
Enabling Cluster Port 0 and disabling Port 1
BCM5482 cluster port-1 reset done !!
Port 0. SFP Not Ready (0:0). Init failed
using TSEC.
dtsec_init_hw: configuring DTSEC (port 8) for: 1GB, Full Duplex
Interface link changed state to UP.
Interface link state up.
MBI validation sending request.
HIT CTRL-C to abort
.........
No MBI confirmation received from dSC
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: