09-21-2013 10:01 PM
Hi
Is it possible to configure 1:1 NAT44 for certain users inside one large pool and other addresses to be used for dynamic NAT.
I would like to reserve first 64 addresses for the servers and the rest to be assigned to subscribers.
Thanks
09-22-2013 08:16 PM
Hi Omadon,
There is a feature called "Static Port Forwarding" using that you can create static mapping for a specific "Inside Server IP and Port" - Outside IP/port is generated by the application. This shares the regular public IP pool with "dynamic" users.
http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r4.3/cg_nat/configuration/guide/cgnat43cgn.html#wp1016727 gives details on how to configure the feature.
Pl. see if it satisfies your need or not.
regards,
Somnath.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community