cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
483
Views
0
Helpful
1
Replies
Highlighted
Beginner

LDP based CSC VPN - ASR9k/IOS-XR 4.3.4

Hi All,

I am trying to configure CSC MPLS VPN on IOS-XR 4.3.4 on ASR 9K as PE. Currently the configuration is on NPE-G2 and NPE-G1 as PE routers. 

LDP is configured between PE and CE for label exchange and OSPF is the protocol between PE and CE.

When I try to configure LDP between ASR9K and CPE, I am not getting LDP as the option between PE and CE, I am not getting any option of specifying LDP  under the VRF.

Even the IOS-XR MPLS config guide only talks about BGP based label exchange between PE and CE on IOS-XR.

I would like to confirm, can LDP be configured under VRF in ASR9K as PE or BGP is the only option available?

thanks in advance
Arun

1 REPLY 1
Highlighted
Beginner

Got the answer from Cisco NSP mailing list.

 

CSC VPN on MPLS LDP is available only from IOS-XR 5.1.1

 

http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r5.1/general/release/notes/reln_511a9k.html#concept_8CC149B95D7F47D2A19CA1CF5153FB4F

 

 

Content for Community-Ad