Hello,
I am configuring an a couple of ASR9K6's for BNG to replace some old Ericsson Redback equipment, is there anyway to limit suscriber sessions per PPPoE username to 1 session instance per PPPoE username on the BNG platform like we could on the Redback. I see alot of PPPoE limits but i haven't found out how to configure this via PPPoE username.
RP/0/RSP0/CPU0:LAB-Victoria-ASR-9006#show subscriber session filter username viclab1001@10gig
Thu Jan 24 05:56:35.637 UTC
Codes: IN - Initialize, CN - Connecting, CD - Connected, AC - Activated,
ID - Idle, DN - Disconnecting, ED - End
Type Interface State User name
--------------------------------------------------------------------------------
PPPoE:PTA BE2.41.pppoe17403 AC viclab1001@10gig
PPPoE:PTA BE2.41.pppoe17652 AC viclab1001@10gig
PPPoE:PTA BE2.41.pppoe21223 AC viclab1001@10gig
PPPoE:PTA BE2.41.pppoe28081 AC viclab1001@10gig
PPPoE:PTA BE2.41.pppoe29131 AC viclab1001@10gig
PPPoE:PTA BE2.41.pppoe31456 AC viclab1001@10gig
We were able to do this on what would be considered the Virtual Template or BBA template in the Redback by seeting a port-limit per suscriber to 1. I know this can also be accomplished in the Radius authentication box but we have had some issues with radius performing that feature and would like to do it local to the BRAS. We are setup in PTA mode for subscriber PPPoE termination.
