XR OS and Platforms

Hi,at some point, I'll need to mix 100GE and Nx 10GE links between certain routers (mainly NCS-5500 and CRS-X). These links are backbone links which will carry, IPv4,IPv6 and MPLS traffic (L3VPN,L2VPN)What are the options for ensuring that the traffi...

VRF lite route leaking is not working. I have configured 2 route map for import and export on both VRF for providing better control two both the clients. But for testing even after removing the route maps the route exchange is not working.   ip vrf A...

We are stuck in the situation where the user behind a specific OLT are to be provided withone particular service and rest OLT to be provided with service per subscriber. Policy per subscriberhere means the service/policy name which is being received ...

Hi all,we recently started looking into MACSEC, and while lab'ing up, we noticed our 9901's complaining about missing licenses.After digging through whatever information I could find, very few information and no conclusive result was the outcome.The ...

Hi all ,I would like to know how many ways there are to update IOS XR .  Thanks.

Hi all!I'm serching the way to reduce bgp process memory utilization. Initially i used "soft-reconfiguration inbound always" within all neighbors on my router. For now i configured "soft-reconfiguration inbound" to use bgp route-refresh when it's pos...

Hi All, I use Cisco ASR920 with Cisco IOS XE Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 16.8.1b, RELEASE SOFTWARE (fc1) and I can not  create a sub-interface. I'm looking for a good IOS sofware which can permit me to create a sub-interface ...

Hi guysI am trying to get started with ZTP on AS9000v and I can't make it workApparently the router comes up with all the interfaces down and I need to manually login, add the user admin and then configure the Management interface for DHCP , do a no ...

Hi, I am just about to setup new IOS XR devices (ASR 9901 and NCS 540) and I am encountering a silly problem : when connecting to the devices with SSH from a mac os x client, all the terminal keys are disabled and not recognized (arrow keys, cli comp...

Hi all, I need to know if is possible to check using snmp the packet transmitted and dropped by a policy on a specific interface: RP/0/RSP0/CPU0:9k10-RGA-512#sh policy-map interface tenGigE 0/1/0/0 output Fri Jul  7 16:01:29.771 CET TenGigE0/1/0/0 ou...

Hello, ASR9001 is rebooting itself continuously. The only thing that Ive notice so far is that the line card module stuck on MBI Running. ASR9001-LC    MBI-RUNNING   Also I see this log too wdsysmon[457]: %HA-HA_WD-4-DISK_WARN : A monitored device /d...

Hi, we are going to upgrade ASR 9000 series from 6.2.3 to the 6.4.2. The ASR have 2 RSP each, so we wanted to know if before the upgrade we can remove a RSP to keep the 6.2.3 version, and if the upgrade at some point has issues, we can power off the ...

Is it possible to setup two virtual interfaces in different VRF's that are connected to each other? This would need to be equivalent to having two physical interfaces that are physically connected to each other using fiber, with one interface being i...