cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1700
Views
0
Helpful
1
Replies

Partitioned-MDT MP2MP with BGP-AD/mLDP in XR 4.3

Jason Lixfeld
Level 1
Level 1

I've been working on trying to get LSM working between a couple of A9Ks to support a SSM based IPTV application.


After ingesting a bunch of content on the subject, I think what I want is Partitioned MDT, MP2MP with BGP-AD/mLDP (PIM-free core).  I'm wondering if anyone has any links to working configuration examples for this type of MVPN or some good troubleshooting guides for this type of MVPN specifically.


The XR 4.3 configuration guide seems to provide either a broken or an incomplete example, so what I've managed to work out from it, doesn't seem to work.


By 'doesn't seem to work', I mean I have a SSM based join-group configured on a CE with a PIM adjacency to XR PE1.  XR PE1 sees the (S,G) from the CE, but the adjacent XR PE2 (config below) doesn't see it.


Thanks in advance for any pointers.


!

interface Loopback0

ipv4 address 72.15.48.4 255.255.255.255

!

interface Loopback2022

vrf tv

ipv4 address 172.16.0.32 255.255.255.255

!

interface TenGigE0/0/0/15

description Facing Source

vrf tv

ipv4 address 172.16.1.1 255.255.255.0

!

interface TenGigE0/0/0/0

description Facing Core

cdp

mtu 9216

ipv4 address 72.15.49.80 255.255.255.254

carrier-delay up 0 down 0

dampening

!

router bgp 21949

address-family ipv4 unicast

!

address-family vpnv4 unicast

!

address-family ipv4 mvpn

!

neighbor-group P-MVPN

remote-as 21949

update-source Loopback0

address-family vpnv4 unicast

!

address-family vpnv6 unicast

!

address-family ipv4 mvpn

!

neighbor 72.15.48.10

use neighbor-group P-MVPN

!

vrf tv

rd 21949:2022

address-family ipv4 unicast

  redistribute connected route-policy SOURCE--INTERNAL-CONNECTED

  redistribute static route-policy SOURCE--INTERNAL-STATIC

!

address-family ipv4 mvpn

!

!

!

multicast-routing

address-family ipv4

interface TenGigE0/0/0/0

  enable

!

nsf

mdt source Loopback0

rate-per-route

accounting per-prefix

!

vrf tv

address-family ipv4

  mdt source Loopback2022

  mdt partitioned mldp ipv4 mp2mp

  rate-per-route

  interface all enable

  bgp auto-discovery mldp

  !

  accounting per-prefix

!

!

!

mpls ldp

router-id Loopback0

graceful-restart

session protection

log

neighbor

graceful-restart

session-protection

!

mldp

logging notifications

!

interface TenGigE0/0/0/0

!

!

router pim

vrf tv

address-family ipv4

  rpf topology route-policy MLDP-TV

  interface TenGigE0/0/0/15

   enable

  !

!

!

!

route-policy MLDP-TV

set core-tree mldp-partitioned-mp2mp

end-policy

!

1 Reply 1

Rivalino Tamaela
Cisco Employee
Cisco Employee

Hi Jason,

As we have worked on this already. The resolution of this issue is by putting Loopback0 under multicast-routing.

multicast-routing

address-family ipv4

interface TenGigE0/0/0/0

  enable

interface loopback 0

enable

!

Thanks,

Rivalino

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: