Hi Expert,
I found the information "PCALC was disabled. System was in Out of Memory state" output commadn from show mpls traffc-eng tunnels 800. I checked the memory resource on the router, the memory available about 192 MB from 2 GB. I noticed the top process are using high memory such as bgp, ipv4_rib. I'm unsure how can i troubleshoot this and increase the free memory on Cisco 12410/PRP? Notes, 0/8/CPU0 is PRP-2. Thanks
node0_8_CPU0: 301 procs, 1 cpu, 1.09 delta, 7846:21:23 uptime
Memory: 2048 MB total, 192.593 MB free, sample time: Fri Jul 13 10:16:14 2012
cpu 0 idle: 83.32%, kernel: 3.07%
pid mem MB user cpu kernel cpu delta % ker % tot name
291088 278.906 628996.463 14841.822 0.019 0.09 1.88 bgp
258295 153.839 508884.264 3657.564 0.003 0.00 0.29 ipv4_rib
49182 51.109 1181.148 89.111 0.001 0.00 0.09 devb-eide-prp2
8195 18.750 898.618 41.623 0.005 0.00 0.49 dllmgr
258301 16.789 2977.574 110.324 0.000 0.00 0.00 ipv6_rib
122970 16.652 110.690 11.173 0.000 0.00 0.00 parser_server
131181 8.281 1671.270 149.166 0.000 0.00 0.00 sysdb_shared_nc
118862 7.921 131443.621 21659.765 0.022 0.29 2.17 gsp
131182 7.187 598.877 43.159 0.000 0.00 0.00 sysdb_shared_sc
122974 6.949 878.066 5.141 0.000 0.00 0.00 nvgen_server
