Somebody please explain below:
RP/0/RSP0/CPU0:xxxx#admin show environment power-supply
Wed Feb 12 22:17:10.864
R/S/I Modules Sensor Watts Status
Power Shelves Type: DC
Total Power Capacity: 0W
Usable Power Capacity: 0W
Supply Failure Protected Capacity: 0W
Feed Failure Protected Capacity: 0W
Worst Case Power Used: 1490W
Slot Max Watts
---- ---------
0/RSP0/CPU0 250 (default)
0/RSP1/CPU0 250 (default)
0/FT0/SP 495 (default)
0/FT1/SP 495 (default)
Worst Case Power Deficit: 1490W
Supply Protected Capacity Available: Not Protected
Feed Protected Capacity Available: Not Protected
I have connected power in Cisco ASR 9010 ( only one power module is powered up). The ASR9k box is up and functioning ( although it is not taking all line-cards due to power issue). I am not seeing the power module in above output and even Total power capacity is zero? Is it a hardware issue?
