cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

303
Views
0
Helpful
1
Replies
Highlighted

'Ran out of WFQ Profiles' ASR 9010

hello

can anyone knows about this error:


Thu Nov 10 16:07:01.222 CST
RP/0/RSP1/CPU0:9010-PE-MEX10(config)#int GigabitEthernet0/0/0/6.842
RP/0/RSP1/CPU0:9010-PE-MEX10(config-subif)#SERVIce-policy OUtput 20-25-25-15_10M ?
account Turn off layer specific accounting
service-fragment-parent Apply service fragment policy, do not use this keyword for non service fragment policy
shared-policy-instance Configure a shared-policy-instance
subscriber-parent Configure an svlan policy
<cr>
RP/0/RSP1/CPU0:9010-PE-MEX10(config-subif)#SERVIce-policy OUtput 20-25-25-15_10M
RP/0/RSP1/CPU0:9010-PE-MEX10(config-subif)#commit
Thu Nov 10 16:07:26.690 CST

% Failed to commit one or more configuration items during a pseudo-atomic operation. All changes made have been reverted. Please issue 'show configuration failed' from this session to view the errors
RP/0/RSP1/CPU0:9010-PE-MEX10(config-subif)#show configuration failed
Thu Nov 10 16:08:07.035 CST
!! SEMANTIC ERRORS: This configuration was rejected by
!! the system due to semantic errors. The individual
!! errors with each failed configuration command can be
!! found below.


interface GigabitEthernet0/0/0/6.842
service-policy output 20-25-25-15_10M
!!% 'prm_ezhal' detected the 'warning' condition 'Ran out of WFQ Profiles'
!
end

RP/0/RSP1/CPU0:9010-PE-MEX10(config-subif)#

i want to apply a service policy but the ASR don't allowme that

Everyone's tags (1)
1 REPLY 1
Cisco Employee

Hi,

Hi,

Can you get the output for show qoshal resource summary loc 0/0/cpu0?

Most likely you have configured too many unique WRED classes.

Thanks,

Sam

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here