cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
677
Views
0
Helpful
1
Replies

'Ran out of WFQ Profiles' ASR 9010

hello

can anyone knows about this error:


Thu Nov 10 16:07:01.222 CST
RP/0/RSP1/CPU0:9010-PE-MEX10(config)#int GigabitEthernet0/0/0/6.842
RP/0/RSP1/CPU0:9010-PE-MEX10(config-subif)#SERVIce-policy OUtput 20-25-25-15_10M ?
account Turn off layer specific accounting
service-fragment-parent Apply service fragment policy, do not use this keyword for non service fragment policy
shared-policy-instance Configure a shared-policy-instance
subscriber-parent Configure an svlan policy
<cr>
RP/0/RSP1/CPU0:9010-PE-MEX10(config-subif)#SERVIce-policy OUtput 20-25-25-15_10M
RP/0/RSP1/CPU0:9010-PE-MEX10(config-subif)#commit
Thu Nov 10 16:07:26.690 CST

% Failed to commit one or more configuration items during a pseudo-atomic operation. All changes made have been reverted. Please issue 'show configuration failed' from this session to view the errors
RP/0/RSP1/CPU0:9010-PE-MEX10(config-subif)#show configuration failed
Thu Nov 10 16:08:07.035 CST
!! SEMANTIC ERRORS: This configuration was rejected by
!! the system due to semantic errors. The individual
!! errors with each failed configuration command can be
!! found below.


interface GigabitEthernet0/0/0/6.842
service-policy output 20-25-25-15_10M
!!% 'prm_ezhal' detected the 'warning' condition 'Ran out of WFQ Profiles'
!
end

RP/0/RSP1/CPU0:9010-PE-MEX10(config-subif)#

i want to apply a service policy but the ASR don't allowme that

1 Reply 1

smilstea
Cisco Employee
Cisco Employee

Hi,

Can you get the output for show qoshal resource summary loc 0/0/cpu0?

Most likely you have configured too many unique WRED classes.

Thanks,

Sam

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: