08-25-2011 02:23 AM
Dear all
In IOS, we are able to use IPv4 & IPv6 ACL simultaneoulsy for SNMP communities. Can this be done in any way XR ?
from documentation, it seems that only IPv4 ACL can be used.
snmp-server group name {v1 | v2c | v3 {auth | noauth | priv}} [read view] [write view] [notify view] [access-list-name]
TIA
Samir
Solved! Go to Solution.
08-25-2011 04:16 PM
Hi Samir,
4.2 is required for SNMPv6 support. Then you should have the same behavior than with IOS but I didn't test it though.
HTH
Laurent.
08-25-2011 04:16 PM
Hi Samir,
4.2 is required for SNMPv6 support. Then you should have the same behavior than with IOS but I didn't test it though.
HTH
Laurent.
08-25-2011 11:03 PM
Many thanks !!
Samir
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide