09-08-2015 08:07 PM
I would like to know what is the IOS XR command? for:
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps envmon fan shutdown supply temperature status
Thank you very much.
09-09-2015 01:08 AM
Is this correct?
Command in IOS | XR command | Remark |
snmp-server community abc RO | snmp-server community abc RO |
|
snmp-server trap-source Loopback0 | snmp-server trap-source Loopback0 |
|
snmp-server source-interface informs Loopback0 | - | Using snmp inform on IOS-XR |
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart | snmp-server traps snmp |
|
snmp-server enable traps envmon fan shutdown supply temperature status | snmp-server traps fru-ctrl |
|
snmp-server host 11.10.100.121 version 2c abc | snmp-server host 11.10.100.121 traps version 2c abc |
|
09-09-2015 01:29 AM
most of it is correct. To understand what kind of notification is triggered with the "fru-ctrl" trap please refer to Table 3-2 of:
http://www.cisco.com/c/en/us/td/docs/routers/asr9000/mib/guide/asr9kmib/asr9kmib3.html
I suppose you want to use "snmp-server traps sensor" along with "fru-ctrl". The "snmp-server traps sensor" triggers the entSensorThresholdNotification.
Regards,
Aleksandar
09-25-2015 02:22 AM
I can’t configure these commands on CRS-1 XR version 3.6.3. How should I do?
snmp-server traps snmp linkup
snmp-server traps snmp linkdown
snmp-server traps snmp coldstart
snmp-server traps snmp warmstart
Thank you very much.
09-25-2015 04:57 PM
For the CRS platform, support for these options was added into Release 3.9.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: