10-05-2017 03:35 AM - edited 03-01-2019 03:19 PM
Hi,
Could you please tell me if I can upgrade XR from 4.3.4 to 5.3.3 ???
I can't find guide here
http://www.cisco.com/web/Cisco_IOS_XR_Software/index.html
Thank you for your answer
Ima
Solved! Go to Solution.
10-25-2018 10:08 AM
Hi, thanks for your comments! Do you have a document with the HW support (LC and RSP) for 5.3.3 and 6.4.2 in order to validate the HW installed in the router. What about for ASR9001? is similar to ASR9010 procedure? or there anything special case?
0/RSP0/CPU0 A9K-RSP440-TR(Active) IOS XR RUN PWR,NSHUT,MON
0/RSP1/CPU0 A9K-RSP440-TR(Standby) IOS XR RUN PWR,NSHUT,MON
0/0/CPU0 A9K-MOD80-TR IOS XR RUN PWR,NSHUT,MON
0/0/0 A9K-MPA-4X10GE OK PWR,NSHUT,MON
0/0/1 A9K-MPA-4X10GE OK PWR,NSHUT,MON
0/1/CPU0 A9K-MOD80-TR IOS XR RUN PWR,NSHUT,MON
0/1/0 A9K-MPA-4X10GE OK PWR,NSHUT,MON
0/1/1 A9K-MPA-4X10GE OK PWR,NSHUT,MON
0/2/CPU0 A9K-MOD80-TR IOS XR RUN PWR,NSHUT,MON
0/2/0 A9K-MPA-4X10GE OK PWR,NSHUT,MON
0/2/1 A9K-MPA-4X10GE OK PWR,NSHUT,MON
Regards
10-25-2018 11:25 AM
5.3.3 supports all the cards 4.3.4 does.
Here is the release note for 6.4.2, it will validate what cards are supported:
9001 uses same procedure for upgrade / turboboot.
Sam
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide