Upgrade IOS XR from 4.3.4 to 5.3.3 ?!?

[ima imtiger]

Hi,

Could you please tell me if I can upgrade XR from 4.3.4 to 5.3.3 ???

I can't find guide here

http://www.cisco.com/web/Cisco_IOS_XR_Software/index.html

Thank you for your answer

Ima

[3Dg4RIP]

Hi, thanks for your comments! Do you have a document with the HW support (LC and RSP) for 5.3.3 and 6.4.2 in order to validate the HW installed in the router. What about for ASR9001? is similar to ASR9010 procedure? or there anything special case?

0/RSP0/CPU0     A9K-RSP440-TR(Active)     IOS XR RUN       PWR,NSHUT,MON
0/RSP1/CPU0     A9K-RSP440-TR(Standby)    IOS XR RUN       PWR,NSHUT,MON
0/0/CPU0        A9K-MOD80-TR              IOS XR RUN       PWR,NSHUT,MON
0/0/0           A9K-MPA-4X10GE            OK               PWR,NSHUT,MON
0/0/1           A9K-MPA-4X10GE            OK               PWR,NSHUT,MON
0/1/CPU0        A9K-MOD80-TR              IOS XR RUN       PWR,NSHUT,MON
0/1/0           A9K-MPA-4X10GE            OK               PWR,NSHUT,MON
0/1/1           A9K-MPA-4X10GE            OK               PWR,NSHUT,MON
0/2/CPU0        A9K-MOD80-TR              IOS XR RUN       PWR,NSHUT,MON
0/2/0           A9K-MPA-4X10GE            OK               PWR,NSHUT,MON
0/2/1           A9K-MPA-4X10GE            OK               PWR,NSHUT,MON

Regards

[smilstea]

5.3.3 supports all the cards 4.3.4 does.

Here is the release note for 6.4.2, it will validate what cards are supported:

https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-4/general/release/notes/b-release-notes-asr9000-642.html

9001 uses same procedure for upgrade / turboboot.

Sam