08-16-2012 10:03 AM
Can anybody advise if it's hardware related?
RP/0/6/CPU0:Aug 16 16:45:23.168 : envmon_periodic[203]: %PLATFORM-ENVMON-2-FAN_CLEAR : The fan array (Ps Fan(slot 17)) has returned to a normal level.
RP/0/6/CPU0:Aug 16 16:46:16.884 : envmon_periodic[203]: %PLATFORM-ENVMON-2-FAN : The fan array (Ps Fan(slot 17)) has reached MAJOR level.
RP/0/6/CPU0:Aug 16 16:46:43.747 : envmon_periodic[203]: %PLATFORM-ENVMON-2-FAN : The fan array (Ps Fan(slot 16)) has reached MAJOR level.
RP/0/6/CPU0:Aug 16 16:47:10.609 : envmon_periodic[203]: %PLATFORM-ENVMON-2-FAN_CLEAR : The fan array (Ps Fan(slot 17)) has returned to a normal level.
RP/0/6/CPU0:Aug 16 16:47:37.469 : envmon_periodic[203]: %PLATFORM-ENVMON-2-FAN_CLEAR : The fan array (Ps Fan(slot 16)) has returned to a normal level.
RP/0/6/CPU0:Aug 16 16:48:31.187 : envmon_periodic[203]: %PLATFORM-ENVMON-2-FAN : The fan array (Ps Fan(slot 16)) has reached MAJOR level.
RP/0/6/CPU0:Aug 16 16:48:58.049 : envmon_periodic[203]: %PLATFORM-ENVMON-2-FAN : The fan array (Ps Fan(slot 17)) has reached MAJOR level.
RP/0/6/CPU0:Aug 16 16:49:24.914 : envmon_periodic[203]: %PLATFORM-ENVMON-2-FAN_CLEAR : The fan array (Ps Fan(slot 16)) has returned to a normal level.
RP/0/6/CPU0:Aug 16 16:49:51.777 : envmon_periodic[203]: %PLATFORM-ENVMON-2-FAN_CLEAR : The fan array (Ps Fan(slot 17)) has returned to a normal level.
RP/0/6/CPU0:Aug 16 16:50:45.492 : envmon_periodic[203]: %PLATFORM-ENVMON-2-FAN : The fan array (Ps Fan(slot 17)) has reached MAJOR level.
RP/0/6/CPU0:Aug 16 16:51:12.358 : envmon_periodic[203]: %PLATFORM-ENVMON-2-FAN : The fan array (Ps Fan(slot 16)) has reached MAJOR level.
Solved! Go to Solution.
08-16-2012 12:09 PM
here you go:
RP/0/1/CPU0:ios#admin sh env fan last
Thu Aug 16 18:56:28.277 CEST
Note: prior interval measurements shown
0/24/* host AllFansOk Ok
host FanPowerOk Ok
host FanArrayOk Ok
08-16-2012 10:12 AM
Hi,
you gotta check:
admin sh env temperatures
admin sh env fan
also physical examination would be good - the air filters could got dust etc.
Cheers!
08-16-2012 11:56 AM
RP/0/0/CPU0:ios(admin)#sh environment fans last
Thu Aug 16 18:47:29.110 UTC
Note: prior interval measurements shown
0/16/* host PowerFanOk FAIL
host MainFanOk FAIL
0/17/* host PowerFanOk FAIL
host MainFanOk FAIL
RP/0/0/CPU0:ios(admin)#sh environment temperatures
Thu Aug 16 18:48:14.230 UTC
R/S/I Modules Sensor Temp. (deg C)
0/0/* host Inlet 36.5
host Hot 36.5
0/16/* host Inlet 31.0
host Hot 35.5
0/17/* host Inlet 29.5
host Hot 34.0
0/18/* host Inlet 24.0
host Hot 25.5
0/19/* host Inlet 26.5
host Hot 28.5
0/20/* host Inlet 25.0
host Hot 27.0
0/24/* host Inlet 31.0
0/26/* host Inlet 27.5
08-16-2012 12:02 PM
FAIL doesn't sound too good I must say, normally on a 12k with 4.x you should see FANs being rotating:
RP/0/5/CPU0:ios#admin sh env fan last
Thu Aug 16 12:14:51.076 CEST
Note: prior interval measurements shown
Fan 0 Fan 1 Fan 2
R/S/I (rpm) (rpm) (rpm)
0/28/* 3036 3120 3171
08-16-2012 12:07 PM
I am running 3.9.1 on it.
08-16-2012 12:09 PM
here you go:
RP/0/1/CPU0:ios#admin sh env fan last
Thu Aug 16 18:56:28.277 CEST
Note: prior interval measurements shown
0/24/* host AllFansOk Ok
host FanPowerOk Ok
host FanArrayOk Ok
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: