Network Security

Hello, I have a question, I know that the management port of the FTD 3100 family should be considered a GBIC for interconnection, but I was wondering if it is possible to configure another copper port on the FTD to use it as a management port. Regard...

Hopefully this will allow the VLAN 192 traffic to traverse my IPSEC tunnel to AWS. Had Star Link modem set to a Public IP, which it still provides to the router via DHCP on intG0/1/0

We have two FTDs managed by an FMCv. both running 7.2.8. We are still using Snort 2 and will most likely go to Snort 3 after we are done upgrading to 7.4.2.We are thinking about a secondary network appliance that would possibly use snort as part of i...

Hi, I have a Cisco ASA 5510 running as a firewall and hosting AnyConnect. Behind that is a server running True NAS which hosts a variety of things. Currently I have it setup with a plex server and the port forwarding works as expected however I would...

We recently replaced our PAYG ASAv with a newer version 9.20 instance. During the upgrade we noticed that the new firewall was unable to change into a licensed state, instead, it was stuck at probationary and would have transitioned to unlicensed at ...

Hello everyone! In our organization we have two Cisco FTD 2110s managed by FMC and configured in a HA pair. Until recently, they functioned as regular stateful L3-L4 firewalls. However, a couple of months ago, the authorities demanded that high-level...

  Hi Team, We are conducting a greenfield network deployment, which includes a pair of FPR3110 firewalls that need to be configured as Active/Passive with multi-instances. The network consists of core and access switches acting as Layer 2, with all L...

Hello, I would like to understand what the difference is between the two types of backups offered in the FMC. For the FMC configuration backup, I understand. But what is the purpose of backing up the devices? Since the configuration is managed by the...

Hi everyone, I've been receiving this alert on an FMC (running on VMWare esxi 7.0). Just wonder if there is any steps to rectify this. Thanks. 

HiI dont have access to a  lab so am asking a couple of questions'I want to migrate from one FTD to an HA pair, On the FMC thats is currently managing the single FTD there is a sub doamin for the FTD but on the new FMC where I want to migrate the FTD...

Hi everyone. I’m just curious if anyone has tried using ansible with the FTD7.6 managed by FMC 7.6 virtual appliances.I am trying to test out some ansible playbook and python script to create an HA pair but getting different kind of errors.The doc  h...

Hi,We upgraded a pair of ASAs from version 9.14.3.18 to version 9.18(4)40. After that, we could not SSH into the ASA. At the moment, we can access the firewall via the console.I turned on debugging on the ASA while I attempted to SSH. The log file in...