Application Networking

Hi, I am using CM and Optimzer currently in my network. I need to add two more WAAS applicense in network and keep it in HA mode.  Please tell me how I can i fullfill my requirement ? As per cisco online document, we configured central manager in pri...

I am testing the memory upgrade from 4GB to 8GB on the WAE-674 version is 4.3.1.  The WAAS recognized the new memory.  I performed the final step in the documentation 'disk delete-data-partitions' and reloaded.  A few things: 1) i had to re-install ...

Hi, This may seem ridiculously easy but when I bring up a new WAVE appliance they get assigned to a location that appears to be the name of the device with location at then end. I do not see anywhere in the Locations section to assign devices to a lo...

Hello all,I got my WAVE the hard disk drives was not detected while the operating system was being started in WAVE 694.thanks  

I have two wae-574's doing inline interception on a T1 line.  I'm doing Veeam replication across that T1 Line (or attempting to).  It appears that I'm getting roughly zero acceleration during the veeam jobs and it doesn't make much sense why.  Other ...

We have a appnav cluster with 2 x WAE devices configured for inline interception and a single ASR1002 router connecting remote sites. We need the port configuration fo rthe connection betwee the Appnav cluster and the ASR router. We have tried using ...

We recently upgraded the WAE code from 5.5.7 to 6.2.3c, and are seeing too many slow response reported specifically accessing a file server over the WAN.Below are some logs from the smb-errorlog folder08/31/2017 20:07:20.014smbao(21027 0.2) NTCE (141...

Hello,   I'm working for a big Project related to Data Center design and I'm not able to figure out how design new IP addressing scheme. Is there some template or some rule to do it? do exist some book on this argument or some Cisco link?   I have so...

Hi, I keep reading in the marketing material that Akamai Connect allows for the prepositioning of Apple iOS, yet I'm not able to find any gudies on how this is actually accomplished, ie., a step-by-step guide. Has anyone actually done this? Can you p...

Hello, We are working on an IWAN solution where dual ISR 4451-X are used at the Hub (DC) as WAN aggregation and at the remote site we have ISR 4331 or ISR 4321or ISR 892FSP. We are going to implement WAAS and we have few n00b :) questions:I understoo...

Hi everyone, I have an issue with our WAAS. We use the version 5.5.3.59 on OE694 and OE294 and accelerator cifs is enable. When we create a preposition file in Home > Configure > CIFS File Services > Preposition and we use a location in FileServer S...