Application Networking

The upgrade process for ANM virtual appliance 4.2 involves doing a backup and restore as root user. I have looked through the documentation and have even reinstalled the virtual appliance to see if the install script gives away the root password for ...

HiWe installed 2x WAE and 1 x Central Manager as per diagram at the Core, rolling out more WAE devices (appliances and SRE-900) at the branches.I configured as follows:Configured IP wccp version 2Ip wccp 61Ip wccp 62On the LANConfigured ip wccp 61 re...

hI

Hi all,As we all know ACE one arm mode change the Client src IP address to the NAT pool IP of the server VLAN.they way if we are using SMTP behind the ACE , we cannot restrict some IPs in the SMTP relay configuration.Is there any way to implement ACE...

Hi everyone, I'm hoping you can solve a little mystery for us!We have a web application that is making heavy use of AJAX.  The client browser is IE6 (due to customer requirements) and the web server is IIS6 (customer requirement) with a failover pair...

Hi In WAE log we found below messagesconfig: %WAAS-UNKNOWN-6-899999: ReportCommandsAccounting: Report accounting after command is executed (logging host 10.11.4.20 priority information)07-17-2011          16:15:08          User.Info          10.10.17...

Hi All:We recently configured a setup to loadbalance 2 application server using ACE4710.  Initially the configuration was to link two app servers directly to ACE4710 without connecting to a Switch, but later, it was advised that ACE4710 is not able t...

Hi AllI would like to deploy a WAE-512 running code 4.4.1 to optimize/accelerate SAN Replication traffic?Reading through a few articles it seems it can only be done using a higher end model like the WAE-7341 & WAE-7371 appliances.I went through the f...

Dear All,As a part of our software project, there are servers and Cisco swicthes in our DC, as we are going to upgrade and install new software's vendor came up with the below product.We do not want to go with this product since we have a complete Ci...

Hi Experts,Could someone please let me know the SNMP settings for my ACE failover.Query:-When my active 4710 ACE load balancer fails for any reason(due to s/w or h/w)  and the second 4710 ACE load balancer  take over (becoming active), will there be ...

Good day,I am installing the Demo version of ANM 4.3 on a virtual machine.The install was successfull, however when i try to import the demo licence from my laptop to the server it does not allow me to tftp the file to the server.I am using the comma...

Hello, I have the following problem, after finish the rebuild of my Raid-1 in the WAE-612-K9 equipment, it show a critical alert:- CMS STATUS IS OFFLINE.I try ACTIVATE the WAE via  web interface , but this doesn´t work.Please somebody have any ideas ...