Application Networking

Hi,We have ACE Appliance containing more than 10 applications. When one of the application team did 2000 user testing ACE dropping all PROBES and made them PROBE_FAILED.  2000 users testing carried 2 Gig traffic (approx) but we have license only for ...

If I connect to cisco switch through vty and provide username & password only once which is wrong and then close the putty window, it results one occupancy in vty channel out of default 5  and never get disconnected until manually kill up the session...

There is VIP that is used by ACE for load balancing web servers. Internal users succeed to this VIP. ASA (connected to Core 6509 switch) is performing static NAT (VIP-to-External IP). External users cannot open web page while requesting for this IP. ...

Hi,One of our customer is looking high speed data transfer so that pls guide us high speed data transfer switch model in cisco L2 or L3 ??Regards!Ak

Hello all,Using an ACE 4710 we have a user setup with the Network-Monitor role which allows the user to view config, interface status, etc.  We would also like to allow this user to clear the interface error counters as well, but nothing else.  Is th...

Hi Guys,Having setup the ACE30 based on the configuration guides, I've been able to get basic load balancing working, probes, stickness etc.  However in testing connectivty, I've noticed that from the real server on the backend I cannot seem to PING:...

Hi there,I have an existing CSM deployment that is performing L4 load-balancing for a number of serverfarms. Each farm is presented as it's own VIP, so no VIP has multiple farms on different ports. I'm trying to add a GSS in front of this and I'd li...

During our recent pen test, it was discovered that the GSS appears to be running what could be considered a "weak" cipher:"SSL Weak Cipher Suite Supported - The web servers tested supports the use of weak SSL ciphers."I've logon to the GSS but was no...

Hi, how to do ftp load balancing on ACE. does ACE auto senses ftp?

Is anyone running WAAS Express on their G2 routers?  What are you experiences with it?

Hello,At a new installed WAE 674 I get by type-tail syslog.txt continously the follwing messages:2011 Sep  2 13:58:00 wae so_dre64: %WAAS-RE-3-690432: (690340:2) FileMgr failed in writing data-segment start at id=2272971, error=0xfffffc09--Disk is fu...

HiI am implementing af Ironport web scanning solution in a current network and i have som problems with HTTPS trafic.I am using the following command.-------------------------------------------------------------------------------ip wccp 70 group-list...

Current topology in network is such: web servers with content needing to be load balanced are in vlan 35 and these servers are directly connected to Core switch (two 6509 VSS) via 20 Gb EtherChannel. Vlan 35 also spans some other switches with other ...

well - infact the whole lot - all config wiped, all that is left in the disks is the  software and a few other files. I read from core: a file called ixp1_crash.txt which was time exactly one hour and 2 mins before info in ha_mgr logs showed the devi...