Application Networking

Hi,I am new in ACE 4700. I have configured ACE 4700 for load balancing the FAX servers. Probe, ServerFarm, Real server, Virtual server, VIP state every thing is up and in service. But I am not able to access the real server using VIP IP address.Below...

Hello;We use wccp version 2 on 6500 series switch integrated with websense. At first configuration we use default settings for methods (GRE and Hash). But sometimes we had some problems clients internet connections.   So we tried to find out , what t...

Hi AllWe have a CSM-S to load balance the web servers. It is configured with very simple round robin config with cookie based sticky. So, when the user access the webpage CSM insert a cookie to provide stickyness for that connection. All work well......

HI Experts, We had some issue with Datacentre ACE modules. Both primary and DR ACE modules got restarted in 16 hours difference. Unfortunately Syslog was not configured on the ACE and local logging got cleared after restart. The current IOS version i...

Hello all,I have a CAS array for Exchange 2010 configured to loadbalance on my Cisco ACE 47XX. My question is: Can I run a mixed VMware cluster version 3.5 and 4.1 on my ACE? I am experiencing is dropped RPC connections and I was wondering if that co...

Hi, is there a way to reset/clear a particular context's configuration?I see there is a 'wri erase' within a context, but no reload/reset - neither from the context itself nor from the Admin... puzzling...I dont want to reload an entire blade just to...

Hi,we are having issues in configuring load balancing for a TCP port. For HTTP it's working without issues and we have the ACE also balancing for other TCP ports.Here goes the relevant config:_________________________________________________probe htt...

Anyone know if it's possible to get a Riverbed talking to a Cisco waas?  If they use the same standard protocol (wccp) can the two work together?

Hello All,Please forgive my ignorance but can the ACE appliance behave as a reverse proxy for http and ssl traffic? I would assume it can given how it does SLB but SLB is not a requirement at this time. Thanks for your input.

Hi,I have a GSS rule pointing to an answer group with 2 answers. The rule uses hashed as the predictor to load balance requests between the 2 answers configured. The query for GSS comes from 2 clients. I have an issue where GSS is returning the same ...

When I try to configure ssl-proxy server i get error message as below.Advice will be greatly appriciated.GIN/Admin(config-pmap-c)# ssl-proxy server <name>Error: ssl-proxy doesn't have a valid key/cert, cannot use it.gin_cert.PEM:Subject: <..............

Hello,brief question:if I terminate HTTPS session on the SSL module inside the CSM, will the SSL module re-establish a new session with its own IP address to the HTTP VIP on the CSM or will re-establish the session with the IP address of the source c...