Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi ,I have an alarm for WAE device on the CM that "nodemgr: The device_mgr service has been disabled" can some one please tell me how to reload the device remotely .Is it possible through WAAS CM.
Hi all,When I do show running-config on the primary ACE unit, it either takes several minutes, or forever.Generating configuration.... (and stays there)Show startup returns immediately. show running-config on the secondary unit (hot standby) returns ...
Hello, I have an ACE 4710 to balance some aplications exposed to Internet. But one of them has problem with concurrence, the question is, Are there a way to limit the number of connections to this application by public IP address?Thanks,Haiver Bermon
I tried to configure ACE module installed 6500 switch with brige mode. But it always failed.The subnet (both VIP and real server) is terminated in the ASA firewall. for example, vip is 2.2.2.2 and real server is 2.2.2.100. when our internal user run ...
Hi,Hopefully someone can tell me if what i'm trying to achieve is possible. I need to append details to a URL, i've attempted a rewrite but dont want to send the 10.10.10.1 address back to the client and want to send their original request with the a...
My first question, can anyone recommend some very heavy reading discussing the ACE modules and associated traffic flows and order of operations? Not just how-to scenarios. And the primary question that brings me here:I've got an ACE module in a 6500...
Hi there,if anybody has encountered or worked with Cisco ACE 4710 and following scenario:ACE is configured with one virtual ip, for load balancing of a single server on different unique TCP ports.Its just like loadbalancing 2 physical servers but onl...
Dear All,Can per user get management access in per context on ACE module?For instance, user A can manage just context A, user B can manage just context B on attachment file.Thanks.
Dear all, I’m trying to find out whether you could restrict access to a single VIP to only 2 different source ip addresses? Our situation looks like: ACE module setup in one-armed design, using NAT.About 200 vips are defined. I know you could restric...
I have a router that has been configured to show ip flow top-talker information. I recently added a WAAS to this site that is using WCCP redirection. The 'top-talkers' output on the router still works - but shows source/destination of the router an...
I'm trying to reload the software using the recovery CD on one of my WAVE-574s in the LAB. I'm unable to use the recovery CD. I tried every option and I still can't load it. Any ideas? I already tried swapping out the hard drive with another one in t...
Hello,on one WAE in my network I receive heaps of error messages like the followingError getting the security descriptor of nv02521.w2\swl$\SWL_Tools\PDX_TOOL\PDX_Tool.exe, client 172.16.82.111.can anybody help out here what it means ? As far as I ha...
currently we have access lists that allow any traffic to the interfaceshowever a new design has come up about setting up a new VIP and only allowing 6 hosts to that VIPwe still want to keep the any any on the interface-butwould I do this using class ...
Hello Guys,Customer is looking to load balance Dot1x traffic going to many Cisco ACS servers. Concern is ACS server do not maintain any states so need to make sure that all the requests from a particular ip going to multple ports(1812 and 1813) are g...
