Application Networking

I need to implement ISR-WAAS on this ISR 4400 router. From the "show virtual-service" below, does it mean the router has 4 GB memory, 1G Flash, and about 200 GB storage volume? If that's the case, I need to plan for memory upgrade to 8 GB at least?IS...

I am getting a Split cluster detected error due to the AppNav Controller beind dead. Outside of a power cycle of the router, is there a way to restart just the AppNav Contoller process? I have found several documents on all of the 'show' CLIs to tr...

Hi,We would like to enable radius authorization to the WAAS Central Manager GUI. We are having some problems doing this. Also this is only documented for TACACS and not for Radius. We've seen the waas_rbac_groups attribute that can be delivered via T...

Hi Is there any good guide to configure WAAS on ISR? Thanks

Hi,I have a strange issue with nexus 3000.I having a problem on this nexus 3000 after I create the interface Vlan ,I cannot ping the virtual ip address (i can PING physical IP).Attached you can see the sh run+sh license usage .  

Hello, how can I protect Virtual Server with ACLs on an ACE?I want one ACL per virtual server.I know that I can use one big ACL one the VLAN Interface or global, but that it is not very user-friendly. Best regards.

  WWe're running ACE SM 5.2 and are seeing an anomaly, where when a client sends encrypted traffic to the ACE in an SSL termination configuration, the ACACE terminates the SSL traffic and then sends clear text to the server. Because the server is una...

Hi, I have a Nexus 9396PX switch which supports SFP+ transceiver on its fixed module. I have got GLC-T transceiver. Is GLC-T compatible with 9396PX?Thanks Muhammad Hamid Ashraf

hi, would you you please have a look on that thread and tell me what you are thinking...https://supportforums.cisco.com/discussion/12630356/mtu-waasmpls-sap-question#comment-10857921 would be great... Sebastian 

Hi Folks/Cisco members I need to know if below CVE-ID are affected on Cisco ACE.I did research but could not found the exact details and found below links only.I need to know how to check open ssh version in the IOS .on cisco ASA i know it can be fou...

Hello,I'm doing a POC of WAAS devices with one Accelerator in inline mode and the other in WCCP.The WAVE in WCCP is configured as followinterface GigabitEthernet 0/1 ip address 1.1.1.2 255.255.255.252 exitwccp router-list 7 1.1.1.1wccp tcp-promiscuou...