Application Networking

Hi folks,I am trying to understand why my SLB configuration isn't working, and would really appreciate some advice on this.I'm using dispatched mode, as the web servers are locally connected to the router via a switch.  Here's a simple summary of my ...

I know tha..." If a power, hardware, or unrecoverable software  failure occurs, the network adapter automatically begins operating in  bypass mode, where all traffic is mechanically bridged between the LAN  and WAN interfaces in each group"But obviou...

Good day,I would like to confirm if the following is supported on the a WAVE, WoW solution. I think so, but need to confirm.1. AD2. DHCP3. DNSNot concerned here.Confirmation required on these two points.4. Windows 2008 R2 Std 64 bit5. SCCM as seconda...

Hi,I am having setup with a single server with multiple interfaces common routing table configured in the same vlans behind the CSS.CSS front end - 10.2.1.0/24CSS back-end - 10.3.1.0/25The server interfaces are in diferent vlan (10.5.1.0/24) to that ...

Hi all,I have a problem with a CSS 11503 (release 8.10.1.06).We have two CSS one Master and one Backup.We have done a filter into the log traplog of the CSS Master and then this one become freezed and the other CSS become the Master.When the first CS...

Is it possible to have the traffic between the CMS and the WAAS accelerated?the WAAS is using WCCP. The WAAS is not connected to a separate subnet.

HiWe have WAAS deployed at our client place with around 28 branchesJust curious to know how the Graphs calculated or co-related within the system.Currently as per our observation one of the branch WAE graph shows 16G traffic for last one hour, howeve...

hi everyone,i'm wondering if it's possible to query the amount of TCP connections via snmp, that are handled by a wae.it's an important characteristic value to check if optimization is working properly.looked over the several MIB documented in the la...

Has anyone deployed WAAS using multicast for the WCCP registration? We're using the multicast address of 239.0.0.1 ip pim dense-mode and multicast routing being enabled. Does anyone know if you can use  ip pim sparse-dense-mode instead of ip pim dens...

Here is a scenario I'm running into and want to know if this is expected:WAE1 is rebooted and all of the hash buck is assigned to WAE2 to optimize all the traffic.WAE1 comes back online but receives a different hash buck assignment 128-255 instead of...

Hi,does CISCO appliances WAVE-274 et WAVE-474 support the optimisation from branch to branch?and how many peers branch-to branch it support?Tx