Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,Is there any cli command that gives us an overview of the Total Optimized TCP Connections in the box for that moment ?Best Regards,Bruno Petrónio
Hi Guys, I have problem for Authentication Windows File Sharing.I have environment with WAE 674 (HQ) and 2 WAE 512 (CM,BR) using version 4.1.1d and using WCCP protocol Problem:Slow time (30 s) for open authentication Windows File Sharing. I'm config ...
I have a WAE running 4.1.3 that registered successfully to the CM but is failing to pull the config from the CM (also at 4.1.3). It shows up as activated and online, but nothing shows up under the Services column within CM - where you typically see A...
I have a remote site that is seeing the following errors:(scsi0:A:2:0): Probable outgoing LQ CRC error. Retrying commandSCSI disk error : host 0 channel 0 id 2 lun 0 return code = 10000 SCSI I/O error: POSSIBLE BAD DISK -- device 0x820, sector 104535...
Users on the edge site are unable to access some websites in DMZ. Some links work and some do not. How to troubleshoot? The page seems to load but never completes. Sent Connection statistics to Cisco and no solution yet.Any inputs are appreciated.Tha...
Trying to get an ACE blade to do L3/L4 load-balancing in one-arm mode, but using PBR rather than source NAT.Got a base config together and load-balancing seems to be working Ok. The problem I am trying to figure out is how to deal with direct flows, ...
hi guys:Can ACE send out email alerts to users if the probes failed?if no, is there any plan to put in this function in the future release?thanks a loti know the work around is to set up the sys-log and configure the sys-log server to send out the ma...
Hi all,After configuring ntp server, the time is syncronized with no problem at all.The issue occurs when the router reloads/turns off, and when it goes up, the hour in the NM-WAE, will never sync automatically.I always have to delete the ntp configu...
Hi, Can we offload SSL for ftp onto ACE, like we do for https. I need to configure ACE where i want the clients to connect to ACE via FTPS (989, 990), and ACE in terms connects to the FTP server via normal FTP (20,21).
hello,what is the rigth syntax to use within tcpports scriptlooking to have multiple ip address and multiple ports. the e.g. file has the following line echo "Usage: ap-kal-tcp-ports \'ipAddress tcpPort1 [tcpPort2 tcpPort3...]\'"will it be \'10.1.102...
Please could someone guide me in the correct direction. I have a CSS 11503 that I am using in a test environment and I want to be able to terminate SSL to the device and then balance unencrypted to back end web servers. When I bought this I read the ...
We're in the process of configuring a load balancing to the farm on the ACE module. We have been given the VIP and the port (80) in conjunction with the VIP. Do we need to configure a Layer7 class-map first and then a Layer3-4 class-map or just a Lay...
This has probably been asked before but when using CSS Load Balancers to balance traffic to Web servers how do you then directly access each individual web server for configuration and local LAN updates etc?Only external connections to the web server...
