Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm looking for some config examples about using two CSM-S in a fault tollerance environment.I have two CSM-S in two native 6513, already using ft configuration for the CSM. Now I want to use the SSL card too!Many thanks.Andrea
Hi, I have a CSS 11500 installed on a client's site performing load load balancing for 4 servers. Its also using SSL termination module.The content rule is configured as follows :content servers url "/*" protocol tcp port 80 advanced-balance arrowpoi...
Hello All,I have this case where HTTP stops working as soon as I configure the policy-map with a ssl-proxy server.I've attached the config to the thread.Did anybody ever come across the same issue?Regards,Thibault.====================================...
Hello All,I was trying to add a ssl-proxy server to a policy map when I had this error message "Error: Called API encountered error".I'm running version A2(1.4a).did anyone encounter the same issue?Rgds,Thibault.
Hi!I need to understand better how the Adaptive response predictor, works.In the site of cisco I found this:Cisco ACE adds several new intelligent load-balancing predictors.The Cisco ACE predictor selects a server based on its response time. Response...
HelloI've tried to configure the SSL url rewrite function in the ACE module. I found in the config guide that it should only works when the location field in the HTTP redirect header matches the entry in the action-list type modify http.What I found ...
I want to take a real server out of a production server farm, but would like the connections to age out gracefully. (Using a CSM). Is the best way to do this is to change the weight of the real server or change the LB predictor algorithm max and min ...
Hi Everybody,I am having 4 cisco ACE blades i.e 2 pairs and I have few questions when I am trying to configure stickiness and session persistence I am facing some issues for sticky table entry sizeIs there any size limitation for cookie size of HTTP ...
I am having 4 ace blades i.e two pairs of ACEs, both are running in high availability mode or fault tolerance mode. I've got shared-vlan-hostid set to different pools on both. However, it wasn't set initially, and the Admin context administrative ali...
We have a setup Internet----checkpoint firewall---GSS----ACE----ServersACE is configured with the rserver ip address and vips. GSS is pointing to vips ip address.When any client try to do the nslookup to website address it resolves to vips ip address...
Hello,I have the following issue.... need to load balance traffic between two servers already working in two different subnets (vlans), at this point is highly desirable to avoid changing IP addresses. Is it possible to accomplish this goal using ACE...
Hi,1. We would like to achieve having port 80 traffic load balanced to a single server in a server farm to multiple ports on the reservers.2. To have the traffic sent to the variuos ports on the servers ports based on the url/site they are accessing....
