Application Networking

I have a question regarding WAAS optimization of TSM traffic. I know there is a policy in the WAAS that applies TFO+LZ+DRE to TSM traffic on ports 1500-1502. On our network there are nightly TSM backups that kickoff and according to the WAAS its redu...

Hi allI have a WAAS installed and working properly, but i need to reset/clear all the results on the Central Manager (without changing or affecting the Configuration done on the WAE's)Is there any simple way to do it?Please adviseBest regards,

Hi,As the topic says does WAAS support acceleration of https traffic? If so where can I find this information?Also and more importantly where can I find performance and scalability information (Max Opt tcp connections, WAN capacity etc.) for WAAS and...

Can you please advise us on what IOS code we should be using on our 2811 router to support WAAS and The HWIC -1FE module.We were using the following code on our router and WAAS was working c2800nm-advipservicesk9-mz.124-3c.binWe needed to install a H...

Not able to telnet to VIP address of CMS from 6500 switch.

HICan someone please explain the exact functionality of the mac-sticky feature. I see in some documents a general idea of what it can be used for, but I'de prefer to know the exact functionality and how it is done.Thanks

Hi,I am probbing balancing the core WAEs with ACE. Most our servers are not balanced, their dft gw is not the ACE and we saw that when I am not using a VIP, the ACE does not do a nat and the traffic goes directly through 6500. The questions is: Can w...

Hello all !! Hope all is well !!I have a couple WCCP for WAAS questions and hope someone can help !!!I have two WAE's (forgot what model are) at the data center, one configured as a Central Manager and the other configured as an accelerator, both are...

Folks, After the discovery process in Cisco WAAS between two adjacent WAE's, I am confussed about one thing.The documentation says that there are 3 segments after the intial syn-syn ack, and ack. One segment from the client to the first wae, the seco...

We have a problem where when our wan circuit fills to almost 100%, file/folder browsing becomes very slow. Maybe 15-25s to open a folder. So a user could wait 60-100s if they have to drill down 4 folders. Users are complaining a lot when this happens...

We have noticed that, after implementing SSL support through CSS11503 w/SSL Module (moving from Apache 2.2.6 with ssl_mod), the 'certificate request' message sent by the server to the client during SSL Handshake phase does not include a list of Disti...

I just brought up a couple WAAS appliances up connected to my 6509 and it appears none of the traffic is getting redirected to my 2 WAAS devices. When I do a "sh ip wccp",all packets are unassigned. I am running 4.1.1b on the WAAS.phx-core-sw-a#sh ip...