Application Networking

Hello,I have a problem, I've configured loadbalance in ACE Module (Switch C6513). the network of real servers is 10.24.8.0/24 and the network of VIP servers is 10.24.16.0/24. I can access to 10.24.16.12 (HTTP, HTTPS, etc) from all networks except 10....

Could you please explain the difference between conc-connections, proxy-connections, connection-rate and ssl-connections rate values on 'show resource usage' output. Thanks.

I really thought that the Cisco EOL CSS and replaced it with ACE.It seems that CSS is still very much alive and being sold. How would you compare CSS to ACE? Features, Design, Cost, Licensing ..etcWhen I compare these two - few things that jump out a...

Hey guys, recently i deployed the ACE for load balancing http application. I used http-cookie stickiness for Session Persistence. I use cookie-insert option to insert the cookie generated by ACE itself.But after this, i can not see any sticky databas...

1. Can the customer customize the health check of backend server ? Eg. Using SNMP to poll the OID to check if the threshold is greater than a specific value.2. Do GSS has database to check the location of client so that they can result the IP of that...

Hi,I have Stagging server, DB server & Production servers. I need to have load balancing b/w Stagging & Production servers. I have ACE 4710, installed in one-arm mode. The reason for that is to bypass ACE from the communication b/w APP server & DB Se...

Hello thereThis is a bit of a vague question..sorryBut, does anyone have any idea which MIBs are REALLY supported for the ACE module/blade for the 6500?I have a customer with an Infovista NMS and is unable to pull any stats for the ACE blade - both a...

Hi all,Is there any timeout, in content's, service, whereelse, wich by default is 20 seconds?I have tried to change the "flow-timeout-multiplier" command to Zero.I've been made load-charge tests using some scripts, and im always getting "connection r...

I need assistance to interpret the show sticky database response. What does the sticky entry value resolve to. I have set the stickiness on source and destination addresses. Is it possible to identify from show sticky database that which is the sourc...

Hi,Is it possble to configure WCCP in an active/standby type arrangement such that If I have a pair of WAAS appliances in the DC that one is primarily operational and WCCP will failover to the second appliance if the first is unavailable ?Thanks,Leon

HelloI installed a WAAS with WCCP configured for traffic redirection.It was working properly at first, that once i got a error (The error LED was on), so after checking the LOGS i found the following error log:02-26-2009 17:52:35 Syslog.Error 192.168...

My two WAE have following alarms and donnot know how to clear it.A. core_dump sysmon core B. eth_bypass sysmon/eth2 InlinePort 1/1/wan eth_bypass sysmon/eth3 InlinePort 1/1/lan eth_bypass sysmon/eth4 InlinePort 1/0/wan eth_bypass s...

I see in the "Network Traffic Application Mix" report on my Central Manger that I have P2P traffic on the network. Is there a cli command that will show me those connections?