Application Networking

Hi ,I have configured VIP in ACE and users are able to access the VIP .How can I access VIP from the real server?.__ RgdsDinesh

Hello,I have a problem, when I disconnect the Server with IP 10.24.8.200 or the server with IP 10.24.8.201 the other server that is alive take 50 seconds in take the control of HTTP service, but the icmp of 10.24.16.10 always is active. what are I do...

I just inherited a CSS and wanted to know what kind of sticky was configured on it . . see config snippet below:!service ata-uta-redir no prepend-http keepalive type none type redirect domain https://ata.ultiprotime.com active! content ata...

I have problema whit load balance for configuration of client Outlook 2007. (using protocol RPC over http). Through the CSS, after a period of utilization, the Outlook lock. And without the CSS doind load balance, no ocurred the problem. I appreciate...

Every few days I get 10-15 of the following message in my WAN router logs: "%WCCP-1-SERVICELOST: Service 62 lost on WCCP client 10.201.100.20". It does this for service 61 and service 62 at the same time. Typically, the logs last about 5 minutes. ...

I am currently running ACNS version 5.5 on our CE510 Content Engine. We want to set this box up to serve VOD requests from WMT. I think the clients on site are all using Windows Media Player version 10. Does this version of ACNS software work with...

I am new to ACE and I need help setting up end-to-end SSL to load balance incoming internet traffic to a pair of web servers at port 443. Any help will be greatly appreciated. I have read the Cisco guide and it is notmuch of help as it doesnt conta...

Hi experts,We have to deal with a wierd behavior of some application from one of the well known vendors in our datacenter. Thing is that the app can not handle more than certain number of TCP sessions/flows at a given moment and starts behaving poorl...

Hello,I'm testing 2 ACE modules running A3.0.0 for DNS load balancing (UDP). We're testing this by using a DNS query generator that (always) seems to use the same UDP source port when originating these queries. At the moment, the ACE module is hardly...

Hi,I have hopefully a very simple question.How can I check ix my WAAS devices have either 1 or 2 Hard drives and the size of each.ThanksNathan

We have a CSS configuration in which the CSS sets a cookie, but it never expires. Can we use the sticky-inact-timeout on the following setup?I believe the answer is NO, as this is only related to IP stickiness content offloaded_crw03 vip address ...