Application Networking

I have a Cisco CSS 11001 that's been sitting around for a while and I'm trying to console into it. I don't have the original cable that came with it and using a standard molded Cisco console cable isn't working. I've checked the manual online and the...

Hi Experts,I have case where i have 2 CSS's in active standby mode. We use a VIP for radius traffic ie. UDP 1813. When in normal operation, all is OK. The IP src of the packet from CSS to the GGSN (NAS) has the CSS VIP IP. After we failover to the ot...

Hi,I need to monitor a keepalive which use a the ap-kal-pinglist script which has EXIT_MSG "Ping Failure".How can I have this message printed out in a log (either traplog or sys.log)?thanks in advance and brchristian piffard

Hi Sir,I have deployed CSM (part number: WS-X6066-SLB-APC) on a Catalyst 6513 running Cisco IOS software. The CSM software version is 4.2(4).When I do the command "sh mod csm 5 reals sfarm..." repeatedly, I notice the counter "total conn failures" ke...

We've got a CSS11500 (and just invested in SSL modules for it) and are getting a mandate to move to IPv6 by June 2008. Does anybody know if future WebNS releases will support IPv6? If not, what is Cisco's path for supporting IPv6 in the application n...

Hi,I have 2 questions about Cisco CSS 11k appliances and its interconnextion in a network:1. Is it possible to interconnect a firewall between the CSS and the Web servers so every Web server clusters would be in a different DMZ? If it is possible, do...

I have a css11503, 3 webservers that I need setup in a reverse proxy, looking for config assistance.

I was wondering if there would be potential reverse lookup problems from other company's when we try to send mail to their mail Domains.If I configure failover for our mail server, I am thinking if we are sending mail, there could be a reverse-lookup...

Does anyone know the timeframe of Cisco WAE+WAAS supporting IPv6? We will be evaluating the WAE soon, and this concern was raised as we will be deploying and migrating to v6 within 2 years.

Hi,I can't seem to figure out the relation between the "Current Local Connections" I can see doing a "sh service <service_name>", and the number of active flows toward that service doing a "sh flows | grep <service_ip>" (looking only at the dest IP o...

Hi Everyone, I made a little lab with one Edge WAE, one Core and one Central Manager. WAFS works fine, but now I want to use the Cisco WAFS Benchmark Tool for Microsoft Office Applications Installation and Configuration Note. I have the following que...

I have a cisco 6513 configured to use wccp v2 with a RedHat AS5 server running Squid 2.6 using L2 redirection. On the squid server I have defined the wccpv2 router and set the assignment to "mask". ON the 6513 I have applied the following commands......

Hi Folks,My CE is currently running in our network for few days but we encouter some unusual symtoms like;1) The web broswer will hang with a blank page without displaying any item. After a while, everything will come out instantaneously. For big web...

Hi everyoneI really hope there is a solution to this problem which has been irritating me for years:When I copy and paste more than a few lines of config into any one of our CSSs (ver 5.00, 7.50, 8.10 all have the problem), some characters get missed...

I have an ACE module in a Cat6500, that is load balancing to some HTTP servers.occasionally there are SQL injection attacks towards the http servers.I know the ACE can filter based on http strings, but If you can provide me with some basic templates ...