Application Networking

Hi there,Mobile GSM clients connect through WAPGW over CSS to real servers. We want to stick their connections based on msisdn field. As it seems this field is not recognized by CSS since "lookup fail" counter increases ant there is no match. We have...

Hello,i've read the Manual for SSL Termination.I did not find any Option, how i can control the Secure and the nonsecure Port. On CSS it was possible to do this in the ssl-server inside the ssl-proxy-list.How can i change that on the ACE?Sven

Does anyone have a good health check for SIP?

Hello,i'm actually testing ACE Module to exchange our CSS Systems.On our CSS we have set up some groups that do NAT into the same VIP as the Content Rule uses.So the Server are accessible by the same IP that they use for outbound connections.I've not...

Hi guys,What does the "=" mean in Cisco part numkber? It seems ther is no difference between the parts with a "=" and the parts without a "=", such as "GLC-SX-MM" and "GLC-SX-MM="Thanks,Justin

Good day, I'm hoping someone can assist. I have the Web Admins reqeusting that they want the users to be able to just put in there browser http://www.company.com and then automatically be transfered to http://www.company.com/site_a. Currently this is...

We have recently installed a configuration of Cisco CEs and one CDM (model 566) to support windows media streaming from our intranet IIS/Windows Media servers. We have configured routers in area locations to transparently re-route WMT requests to a ...

When i execute the command show tfo connection summary I get the alot of PT in Progress and PT No PeerresultsWhat do these mean as far as optimization goes? These all are appearing under the Pass Through Connection Heading. Also, application engines ...

Hi, sometimes we experience problems resolving a dns name behind a content switch. The problem solves himself after 5 minutes or something like that. We see the dns request on the dns servers subnet. It looks like the is a problem when the packet ...

Hi, I am trying to enable XML over HTTPS on a CSM (WS-X6066-SLB-APC)with 4.2.5. When I go under XML-Config I do not see anywhere I could setup HTTPS. I would appreciate your help.

Hi all, I have a CSM-S module in a Cat65xx system and working on my design. The MSFC is on the client side and the server and client side at the CSM should be in the same subnet (so bridge mode!?). How can I integrate the SSL daughtercard (DC)? Can I...

HiI'm a SSL Newby, and I'm stuck installing a Verisign SSL Certificate on the CSM-S SSL Offloading Card. I generated the RSA Key pair, the trustpoint, I enrolled the cert. via the terminal method, then I copy/pasted the cert. to verisgn and I got a s...

Hi,how it's possible configure direct access (management for the servers) from client side to the real servers located in server side in routed mode? can anybody send here configuration example?thxmartin

Is there any way to clear the "flow statistics' high-water counters of an CSS11506 running 7.40 without rebooting?