Application Networking

Need help determining why prepositioned content is not replicating via multicast to remote content engines.Root content engine is in separate ACNS location from remote. Root is primary sender. Multicast is functional across routed network and multica...

I have configured a critical service(ap-kal-pinglist) for the VIP redundant failover, default freq,maxfail and retry freq is 5,3,5, so I think the failover time is 5+5*3*2=35s.But the virtual-router's state changed from "master" to "backup" in around...

I have a pair of CSS 11151 each connected to a pair of cross-connected 3550 switches,I've configured VIP & Interface Redundacy,either VLAN1 interface or VLAN2 interface is shut down will cause the virtual router switchover. Recently I met some proble...

Dear Sir.If users are not in the CDN coverage area, CE will return a built-in error page below. Is It possible to customize it? If yes, how? Regards

hi, I can select disable authentication from web page (--> Authentication --> Authentication Scheme --> then select "Disable Authentication" but how can I do it from command line.Regards

Hi All,I have a CSS 11503 ready to be configured for load balancing some web servers in our dmz and server vlan. The web servers are connected to a 6509 switch on the dmz vlan with private addresses. The default gateway points to a dmz i/f on the PIX...

Hi,I am working on this:I have two sites, each with a pair of CSS running ASR to safeguard against the CSS being single point of failure at each site. Each pair of CSS is connected to a server farm. Global server failover/load-balancing is achieved b...

I had a conversation with a customer that went along the lines of "ohh and XP is much better than windows 2000 because it only asks you to authenticate once, not per proxy (ie once on HTTP and once HTTPS)"He said no it still asks me twice, the only d...

Hi,trying to figure out a possible solution for a 6500 and got a bit confused. According to my knowledge, IOS SLB is working either in L2 (MAC) or L3/4 (NAT), to ensure load balancing. CSM comes in the game, but offers much more, extending to L4/7. A...

Hello,I am running a CSM 4.1.1 and a vserver configured with SSL stickyness. As https client I use MS IE 6.The problem is that MS IE renegotiates the SSL Session every 30 sec to 2 minutes. (new SSL-ID)http://support.microsoft.com/default.aspx?scid=KB...

All documentation I have been able to find configures a Sorry Server on another internal non-load balanced address and the CSS manages the flows and directs them accordingly. Is it possible to configure an external sorry server at an off-site locatio...

I need some help creating a content rule for a service that we offer to our end users. We have a video server that people can hit via the web. Currently it sits on one server in a DMZ and is not going through a CSS. We have just built a new environme...