Application Networking

Hi everyone,I have a environment with a 6509 Switch with a CSM board installed, and I would like to know how I configure to a client when make a connection on the SSL Server, "Sticky"the SSl connection and nor balance in other server in a Server Farm...

I have an immediate need for a hardware load balancing solution. This I can solve easily, but I have planned future needs that will require qreater functionality. Here is the scoop. I have immediate need to load balance Citrix NFUSE servers. Can they...

Sounds simple but I'm unable to locate the command to clear these statistics other than a reboot.We are testing the CSS 11500 and trying to determine the hit counts. Clearing these statistics would be very helpful. Help is much appreciated! Regards

please tell me howto disable ftp server on Content Engine 7320. My Content Engine running ACNS software version 5.0.11.thank you.

I have a Cisco SCA SSL appliance in front of a Foundry Server Iron used as a load balancer for 2 websites. One website is SSL enabled using the SCA appliance as it forwards the requests to a VIP on the Foundry. I want to offload SSL traffic for the s...

I have the following case: CSS11501 is connected to a L2 switch, and two PIXes are connected to this same switch, and the three devices: CSS and two pixes are in the same subnet. the CSS could ping only one of the PIXes, not the other. when issuing s...

From the documentation I have read about failover (when a service fails) it lists several loadbalancing types, but the advanced-balance-sticky-srcip is not one of them. Is it possible to configure failover linear or failover next when using adv-bal-s...

Cisco documentation says that you can use archive command to save your custom keep lives in archive directory, and after you are done upgrading and reboot switch you can use restore command. What it fails to mention, is that after doing a restore on ...

We have a CSS11506 w/ SSL terminator (Version 7.20.2.06). Currently we are using the SSL terminator to handle encryption/decryption with the self-sigend test certificate. Traffic from the client to the CSS11506 is over HTTPS.Behind the CSS11506 we ha...

We have a series of 6 11503's over 3 sites. They each have a cacheflow server connected on the backside and the network is configured such that when a client requests a DNS resolution for a web page the 11503's respond with the A record of its IP add...

Hi,i'm just wonder if the 64K ports limitation per IP address will have any impact for load balancing senerios. Do i need to have 2 virtual IP addresses for concurrent connections more than 64K?rdgs

Hi all, I configured a CE as forward incoming proxy but it seems that it can't cope with HTTP 1.1 pipelining:If the client sends a number of consecutive HTTP GET in the same HTTP flow, the CE is not able to give back the content to the client.The CE ...

how can i log the dying status ??I tried: logging subsystem keepalive level debug-7 logging host <hostip> facility 7 log-level debug-7 without success.using WebNS: 7.20 Build 305thanks in advance