Is it possible to get a Cache 510 to pass URL requests to a SurfControl server. I see that N2H2,Websense and Smartfilter are supported and was wondering if it could work to a SurfControl server
When configuring a CSM module, when do I need to configure NAT Server or Nat client on my Serverfarms? I know what NAT is but what is it's function in this situation? The docs give no real information about this.Thanks.
I have been asked to look at a CSS config, but am still quite new to them myself. There are a pair set for box-box redundancy. I have dropped those bits out as the bits I am interested in are the use of a content rule to create a VIP for the return t...
Hi team:I have a trouble with a CSS11150. The chasis has configured 2 Contents, every content rule has 5 srevices associated, Connected to the CSS are five servers ( 5 services ).The servers has two apache´s runnig one listening in the 80 and the oth...
Hello,We have recently installed 2x CSS 11500 in our network. Now the configuration consists of 3 interfaces, 1 for the Internet Traffic, 1 for the Intranet Traffic and 1 for the actual Servers (i.e. webservers). Redundancy between boxes is done usin...
Hi,we're planning to use CSS11501 with 2 Circuits. Ho do I prevent CSS from routing between these 2 circuits ? We want to route the traffic between these circuits/IP range through a FWSMAny ideas ?RegardsDirk Hellmuth (CONET AG, Germany, CCSP)
I have a Cache Engine 505 and I was wonder if it can be configured to cache a specific site. So when a user sends a http request to my internet router interface, they will see only specific content.
We have configured box-to-box redundancy and it works fine. However, it seemed to fall squarely on a single point of failure - the heartbeat link between the 2 CSS. Could we have more than 1 physical crosscable connection between the 2 CSS?
CSS's running version ap0500108s.After issuing the commit command get a strange error message - have never seen this before. What does it mean and how to fix or kill the sync that it thinks is going on? MINAFAP0922# commit_redundConfig "10.11.3.69 -i...
Hi all,My css11501S terminate the https client's requests and load-balance these between 2 backend servers (clear text, http).The web pages contain links to other services. this linkas are in "http://www.something.com" form. I wanna these links to be...
Here is a summary of what I am trying to do: I am looking for a tool that will allow me to reference OID and Table Index values for Content Groups and Services on our Content Switch. I do not see a reasonable way to correlate the return values from ...
Hi All,I am trying to configure CSS sending log mail to me via our Lotus notes server.logging sendmail myemail@xxx.com 10.0.0.1 info-6I did not get any e-mail eventhough the CSS sent it:LB2201C2# show log-stateSendmail: SMTP Host: 10.0.0.1 Recip...
Hello,we have a ACL and associate a group to it.So we can control, which traffic is allowed to go out of our DMZ and how the source ip will be translated.Also, we got a new Application, whichs sends Data on a TCP Connection about every 5 minutes. (It...
Hi,I have a customer who is experiencing difficulties with one of our online systems which is run on a secure server. Their internet connection is filtered via the above content engine. So far he has been unable to resolve this, despite entering an e...
hi i installed a content switch which has to pass both multicast and unicast packets arriving from internet adn intranet. but there seems to be trouble in passing the multicast packets. do we have to enable multicast in the switch or is it enabled by...
